DIY 350zHR Intake Swap

Megan370z · 11-25-2010, 07:04 PM

another Update before going on the Dyno to find the result !

I finally put myself back into it and after 4 try , I finally got to screw into the 4th hole that was giving me a hard time !
I was afraid of making a hole by grinding into the wall since the screw is right touching it !

so yeah everything is done and ready *hose included*

total time spend on the project 10-11 hours
I could easily cut the time by more than half of what it took me now ! hehe
since having to install and remove the intake manifold pretty much took half of the time.

the 4th hole ( hardest one )

same one different view

testing with a washer

top view

Bolts used

Completed Unit !!!!!!!

11-25-2010, 07:04 PM	#19 (permalink)
Megan370z A True Z Fanatic Join Date: Oct 2009 Location: Canada Posts: 1,156 Drives: 370z Rep Power: 25	another Update before going on the Dyno to find the result ! I finally put myself back into it and after 4 try , I finally got to screw into the 4th hole that was giving me a hard time ! I was afraid of making a hole by grinding into the wall since the screw is right touching it ! so yeah everything is done and ready hose included total time spend on the project 10-11 hours I could easily cut the time by more than half of what it took me now ! hehe since having to install and remove the intake manifold pretty much took half of the time. the 4th hole ( hardest one ) same one different view testing with a washer top view Bolts used Completed Unit !!!!!!! Last edited by Megan370z; 01-07-2011 at 12:14 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Engine swap	370z TT	Engine & Drivetrain	30	12-26-2016 12:11 PM
Someone swap this!	SE	Engine & Drivetrain	10	09-02-2010 06:51 AM
2jz swap	Gunzero	Engine & Drivetrain	14	08-23-2010 10:57 PM
vq40 swap	jnaut	Engine & Drivetrain	11	05-15-2010 01:25 PM
Swap 7AT for 6MT	Gabriel77	Nissan 370Z General Discussions	34	08-26-2009 10:09 AM