DIY: Finally Installed The STILLEN G3 Intake today! Lots of Pics inside (AK370Z)

AK370Z

Send JOSH a pm and he'll give you a deal!

You can do the install by yourself. Read this guide and another DIY by another member and you should be good. HOWEVER, during the bumper removal process, you MUST need another person to hold the other side of the bumper.

The thing you should watch out for is to buy a good dremel. I spent hours cutting that hole with a hack saw! So, get a dremel or something good, have a lot of patience (i took my time and spent close to 4 hours because I was taking my time), carefully remove the bumper. There's a DIY on bumper removal in the DIY section (by DIGITONIUM). Def follow that. Helped me out a lot.

Good luck.

K&N rechargeable.

Thank you . yes unfortunately you do have to remove the bumper. But it's pretty easy. I was VERY nervous too in the beginning but if you follow the bumper removal DIY, and have a person or two help you hold the bumper as you remove it, it's VERY easy. As for cleaning, it depends on your driving areas. If you live in a dusty area or country road, it's probably needs to be cleaned quicker. Ask Josh for the average K&N filter life before recharging.

That's because spammers just LOVE my diy guides

__________________
The370Z Signature Pictures ll Want to rock our forum decals on your car? Then click here! ll How to Embed YouTube Videos In a Post
STOP! (Hammertime) ll Become a Premium Member Click HERE ll F.A.Q.
Are You a Nissan Dealer? Click Here to Become A "Supporting Dealer" and Start Listing Your 370Zs In Our Inventory Section
My Monterey Blue Z ll My Exhaust --> My Intake --> G3
Nissan's Official Response Regarding Oil Temp Issue: CLICK HERE
Need a Set of Cheap Winter wheels /Tires? Then Visit The Banner Link Below and Place Your Order. You'll Help Keep The370Z Alive.