DIY: Finally Installed The STILLEN G3 Intake today! Lots of Pics inside (AK370Z)

bacardisk3 · 07-20-2012, 11:47 AM

installed mine yesterday...was easy...pics look a lot harder than it really is..car sounds great..and can def feel an improvement..wish i knew how to post pics lol

taek · 08-25-2012, 10:20 PM

great post!!

rhd · 08-31-2012, 06:01 PM

Thanks AK for a great DIY!

Rockin the G3...

martin82 · 08-31-2012, 06:32 PM

my clamps by the throttle body come off often.... might have to replace it for T clamps...

OMGiGOTaZ · 08-31-2012, 11:30 PM

Quote:

Originally Posted by rhd

Thanks AK for a great DIY!

Rockin the G3...

SOOOOO JELLY

Now tell me, how's the difference under the foot

rhd · 08-31-2012, 11:54 PM

Quote:

Originally Posted by OMGiGOTaZ

SOOOOO JELLY

Now tell me, how's the difference under the foot

The gains are good, definitely pulls harder, have been watching the AFR with torque, the computers in these cars are amazing.

There is a big summer car show here in town tonight, drove around some, seemed like the computer was learning the new intake, acceleration got better the longer I drove (about 20-30 miles), the test pipes are really breathing now!

Lots of fun.

DavidB123 · 09-09-2012, 04:14 PM

I don't mean for this to be a stupid question so I appoligize in advance. Do you disconnect the battery for safety reasons or is there another reason?

LinPark · 09-09-2012, 05:48 PM

Most OCD folks disconnect it whenever they work on their car - it's the safe thing to do for sure but isn't 100% necessary everytime if you know what you are doing. I left mine connected while I installed the spacers on the rims.

370ZGeezer · 11-05-2012, 04:22 PM

Only question i have is.... Do you have to remove front bumper each time you want to clean/replace filters?

Trips · 11-05-2012, 04:30 PM

Quote:

Originally Posted by 370ZGeezer

Only question i have is.... Do you have to remove front bumper each time you want to clean/replace filters?

Yes.

Footloose301 · 11-05-2012, 09:13 PM

Quote:

Originally Posted by 370ZGeezer

Only question i have is.... Do you have to remove front bumper each time you want to clean/replace filters?

Takes roughly 5 minutes to remove the bumper.

EastBayZ · 11-24-2012, 12:26 AM

hello. probably a dumbass as question but....

i took off the bumper and under car plastic guard(s) several weeks ago when i did the z1 oil cooler install. i left it off so i can do my intake install which will be done next week. (not driving the car right now)

Now I forgot which parts, an assortment of clips, metal screws and plastic clips go.

please help! lol I know it aint that easy. I promise next time I wont have the same problem lol

lemon-fresh · 11-26-2012, 11:24 AM

Great write up. I ******* crushed the intake tubes on the passenger side with those clamps. They just kept tightening....

Now I'm stuck wondering how much I might have impeded air flow.

bonfire · 11-26-2012, 12:42 PM

Quote:

Originally Posted by rhd

Thanks AK for a great DIY!

Rockin the G3...

Using foam around the intake and the holes you had to dremel seems like a great idea. I have been getting a little rattle from the passenger side (only noticeable when in reverse for some reason).

How has the foam been holding up now that you have driven it around some?

pfdaxe · 12-20-2012, 08:40 AM

Quote:

Originally Posted by urdeliveryguy

also to enlarge the holes i used one of these bits for my dremel cause i couldn't get the cutter in there properly. it worked way to easily and made a really really nice hole. i recomend it.

Thanks for the great write-up AK

I also used this Dremel accessory and it was a breeze. Just a couple of minutes each side and the hole was large enough. I did a Z1 silicone hose swap while I was doing the install as well as adding a 24 row oil cooler (since I had the bumper dropped):

.
.

08-25-2012, 10:20 PM	#152 (permalink)
taek Base Member Join Date: Aug 2012 Location: Arizona Posts: 11 Drives: 09 Infiniti G37SS Rep Power: 13	great post!! __________________ 09 Infiniti G37SS: Hotchkis, Stillen Gen2, Eibach, GTstrut, etc ..

11-26-2012, 11:24 AM	#163 (permalink)
lemon-fresh Enthusiast Member Join Date: Mar 2012 Location: Calgary Age: 40 Posts: 471 Drives: 09 370z Rep Power: 14	Great write up. I ******* crushed the intake tubes on the passenger side with those clamps. They just kept tightening.... Now I'm stuck wondering how much I might have impeded air flow. Last edited by lemon-fresh; 11-26-2012 at 11:27 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fujimura cf Rear diffuser installed! (with pics)( AK370Z)	AK370Z	Exterior & Interior	73	04-24-2016 04:47 PM
Finally Got my exhaust! HKS Hi-Power Ti Exhaust (many Pics, Video inside AK370Z)	AK370Z	Intake/Exhaust	102	05-11-2013 01:32 PM
Finally Fully Detailed My 370Z with Porter Cable (AK370Z) 90+ pics inside	AK370Z	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	24	06-11-2011 08:48 PM
finally amuse stti extra exhaust arrived + lots of pics	zuperman 370	Intake/Exhaust	22	03-16-2011 12:25 AM
Installed my Stillen G3s. lots of pics and a short review	ssqpolo	Nissan 370Z Photos / Spyshots / Video / Media Gallery	45	09-23-2009 03:20 PM

07-20-2012, 11:47 AM	#151 (permalink)
bacardisk3 Base Member Join Date: May 2011 Location: nj Posts: 34 Drives: 11 370z Rep Power: 15	installed mine yesterday...was easy...pics look a lot harder than it really is..car sounds great..and can def feel an improvement..wish i knew how to post pics lol

08-31-2012, 06:32 PM	#154 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	my clamps by the throttle body come off often.... might have to replace it for T clamps...

09-09-2012, 04:14 PM	#157 (permalink)
DavidB123 Base Member Join Date: Apr 2012 Location: California Posts: 118 Drives: 2015 Nismo,Tec,Black Rep Power: 14	I don't mean for this to be a stupid question so I appoligize in advance. Do you disconnect the battery for safety reasons or is there another reason?

09-09-2012, 05:48 PM	#158 (permalink)
LinPark A True Z Fanatic Join Date: Jan 2010 Location: Columbus, OH Posts: 1,077 Drives: '17 Camaro 2SS A8 Rep Power: 24	Most OCD folks disconnect it whenever they work on their car - it's the safe thing to do for sure but isn't 100% necessary everytime if you know what you are doing. I left mine connected while I installed the spacers on the rims.

11-05-2012, 04:22 PM	#159 (permalink)
370ZGeezer Base Member Join Date: Nov 2012 Location: Conway,ar Posts: 2 Drives: 09 370z nismo Rep Power: 13	Only question i have is.... Do you have to remove front bumper each time you want to clean/replace filters?

11-24-2012, 12:26 AM	#162 (permalink)
EastBayZ Base Member Join Date: Dec 2011 Location: Newark, California Posts: 54 Drives: 011 370Z Tour Spt MT Rep Power: 14	hello. probably a dumbass as question but.... i took off the bumper and under car plastic guard(s) several weeks ago when i did the z1 oil cooler install. i left it off so i can do my intake install which will be done next week. (not driving the car right now) Now I forgot which parts, an assortment of clips, metal screws and plastic clips go. please help! lol I know it aint that easy. I promise next time I wont have the same problem lol