Do It Yourself Fog Lamp (EASY)

Originally Posted by metson

I just wanted to say "thank you." I had purchased a fog lamp a while back not knowing all that went with it. I didn't want to spend a lot more money on a harness and then I'm very afraid of messing up something so I had just put the lamp in the garage until I saw your thread. I ordered the wire and this Saturday I was able to put it in and it works fine. It was not a easy as one, two, three but I was able to get in done in about a hour. I had hooked up everything but I could not get the light to come on. I guess I didn't have a good connection but finally I did.

It is a tight fit getting the metal piece off and back on....

Thanks alot for the idea.

Originally Posted by NaderS.

So i bought the indvisicord and heres a link to the fog light im going to purchase but there no harness to connect the cords into as you can see from the pic. someone enlighten me pleaseeee.

Nissan 370Z JDM Rear Fog Lamp - 26580-1EL1A

Originally Posted by lastblueprint

The invisicord is just a simple 3' wires with 2 connections, one is black and the other one is yellow. You will connect the invisicord to the back of the harness on the fog lamp. On the fog lamp there are 2 wires hooking up to a connector, you will place the invisicord wire on the back of that connector. Let me know if this info helps, feel free to hit me up, I do have plenty of pictures that help illustrate the installation.