02-14-2019, 08:28 PM
|
#1 (permalink)
|
|
Base Member
Join Date: Jan 2014
Location: California
Posts: 165
Drives: 09 Nissan 370Z GM M6
Rep Power: 6722
|
Quote:
Originally Posted by mlsully
I was just giving you a hard time, not trying to an a-hole or anything. 
Plan on using an Arduino with a MPC SPI board to control the CAN bus? I was looking into this a while back, and have the parts, but abandoned the project as my coding skills really suck. I just opted to do the swap and it was a lot easier than I thought.
With the dials, I don't think there are 25 distinct speeds, think there maybe 6 with 4 clicks between each as I never really hear or feel a difference in speed. Could be wrong though... |
Haha. No worries. That is exactly what I am doing. I can already control the AC over CAN bus via a Windows app I wrote. I got a dial control module and non-navi AC amp from ebay and am reverse engineering the protocol to write the interface. Then I should be able to control the AC from the dial control module.
My guess is you also have 7 fan speeds. The first click after AUTO is speed 1 and the speed increments every 4 clicks making speed 7 the very last click. That will make mapping fan speeds to the navi based AC amp simple.
Now, if I could only understand what those two intermediate positions do!
Quote:
Originally Posted by mlsully
1st 25%
5th 33%
10th 43%
15th 53%
20th 63%
25th 81%
|
Oh, wow... that's interesting... so the last position doesn't increase to 100%? Hmmm...
Last edited by radensb; 02-14-2019 at 08:30 PM.
|
|
|
Similar Threads
5Likes
Hybrid Mode
