![]() |
Here are links to what I used so far Used a few of these as extensions on the pressure sensor. 1/8 Male-Female BSP adapter The tee fitting I used. If
|
|
LinkBack | Thread Tools | Display Modes |
![]() |
#12 (permalink) |
Track Member
Join Date: May 2018
Location: Farmington Hills, MI
Posts: 599
Drives: 08 Expedition
Rep Power: 6766 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
Here are links to what I used so far
Used a few of these as extensions on the pressure sensor. 1/8 Male-Female BSP adapter The tee fitting I used. If you look closely, it's BSPP to BSPT. This is part of the reason that I used the thread sealant. No leaks. 1/8 BSP tee adapter Adapter to install 1/8 BSP fitting into the oil pan Greddy 1/8 BSP oil pan drain plug |
![]() |
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
DIY: Triple Gauge Cluster | ryan0 | DIY Section (Do-It-Yourself) | 94 | 11-29-2021 09:47 AM |
Triple gauge covers | black2011370Z | Exterior & Interior | 15 | 09-04-2014 08:45 PM |
Triple Gauge harness pinout? | aszyd | Exterior & Interior | 2 | 08-09-2014 12:49 PM |
OEM Triple Meter Gauge Swap | MONZT3R | Exterior & Interior | 5 | 05-24-2014 09:01 AM |
triple gauge covers | soldknow | Exterior & Interior | 5 | 01-30-2011 12:03 PM |