09-19-2018, 12:36 AM
|
#1 (permalink)
|
|
Base Member
Join Date: Feb 2017
Location: Chisago City, MN
Posts: 42
Drives: 2013 370Z Touring Sp
Rep Power: 10
|
Quote:
Originally Posted by SOUTH-BRONX
in the process of flushing out the brake system with new fluid, the right outer front caliper would not bleed through the valve. Pressure was over 15psi on the Motive Bleeder Kit and all other valves worked perfect. would like to hear thoughts on possible cause before investing to rebuild caliper. Remember the inner valve was perfect on this caliper but, the outer valve had no pressure. as if it was clogged.
Thanks for your comments
|
Odds are your bleeder is plugged. I had on my Acura TL. You can remove and take a wire tie and clean the bleeder hole, better off just purchasing new bleeder(s), they only cost a couple bucks.
|
|
|
Similar Threads
6Likes
Hybrid Mode
