DIY YAW sensor Switch (how to deactivate stability control)

blueranger · 04-17-2018, 11:15 PM

Quote:

Originally Posted by Just1nfj

Hey,

I know there is already a thread on it.

I made a video that explain the same step i invite you to take a look at the original post.

Here :DIY Yaw Sensor rocker switch

There is the DIY video :

https://www.youtube.com/watch?v=qN6K5XFcpzY

if you like it,

Give me a follow on youtube more to come or follow me in the gallery

-FJ

YouTube video not working... Any other links to this?

Sent from my iPhone using Tapatalk

Zcrc · 03-08-2023, 04:18 PM

Interesting idea with the Xterra/Guest VDC off switch. I want to go this route to keep the factory look too.

But just a thought - I don't see why you would need to pair this switch with a locking relay or modify the switch in any way.

If the yaw sensor gets disconnected, its stays off until the car is restarted. Unless I'm missing something it seems like a momentary switch cutting power to the yaw sensor for a second would have the same effect as a true on/off switch

Zcrc · 03-16-2023, 09:56 AM

I was wrong- The VDC switch i used from a 2010 G37S is a Normally Off switch whereas it needs to be a Normally On switch. You need to modify the switch like the users above

Inflaymes · 06-28-2023, 02:39 AM

Why not just use this? Also, there are plenty of light up buttons and stock looking controls online for this mod.

https://www.cs2000-z-tech.co.uk/coll...atible-modules

06-28-2023, 02:39 AM	#4 (permalink)
Inflaymes Base Member Join Date: Mar 2018 Location: Des Moines, Iowa Posts: 176 Drives: 2014 370z Nismo Rep Power: 7052	Why not just use this? Also, there are plenty of light up buttons and stock looking controls online for this mod. https://www.cs2000-z-tech.co.uk/coll...atible-modules __________________ 2014 370z Nismo Fairlady \| Gold Powdercoated Nismo Rays \| Z1 Ported Manifold \| RJM Adjustable Clutch Pedal \| Berk Test Pipes \| Beluga Racing Exhaust \| Custom Billetworkz Imperial Sledge Shift Knob \| Carbon Fiber, Flat-Bottom Steering Wheel \| Ecu-Tek Custom Tune

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Yaw sensor switch	dimitarm	Exterior & Interior	33	08-09-2017 10:13 PM
Let's see your YAW sensor switch	ufoz8mycow	Exterior & Interior	2	07-17-2017 08:38 PM
370Z Drift Project + angle + stability + control	URA	Track / Autocross / Drifting / Dragstrip	47	01-31-2017 09:09 AM
Highspeed Dynamic Stability Control Question	Troyz	Nissan 370Z General Discussions	9	09-28-2013 10:06 AM
Transport Canada to require lifesaving vehicle stability control system	shumby	Canada	8	09-05-2011 08:11 PM

03-08-2023, 04:18 PM	#2 (permalink)
Zcrc Base Member Join Date: Apr 2018 Location: Colorado Springs Posts: 10 Drives: 11 Nissan 370z Sport Rep Power: 8	Interesting idea with the Xterra/Guest VDC off switch. I want to go this route to keep the factory look too. But just a thought - I don't see why you would need to pair this switch with a locking relay or modify the switch in any way. If the yaw sensor gets disconnected, its stays off until the car is restarted. Unless I'm missing something it seems like a momentary switch cutting power to the yaw sensor for a second would have the same effect as a true on/off switch

03-16-2023, 09:56 AM	#3 (permalink)
Zcrc Base Member Join Date: Apr 2018 Location: Colorado Springs Posts: 10 Drives: 11 Nissan 370z Sport Rep Power: 8	I was wrong- The VDC switch i used from a 2010 G37S is a Normally Off switch whereas it needs to be a Normally On switch. You need to modify the switch like the users above