DIY: Door handles (disassemble, paint, reassemble & swap out)

OldGuyFla

Sprayed the basecoat & clearcoat yesterday.
WEAR A RESPIRATOR FOR THE SPRAYING. I wore a respirator for all of the spraying. For sure wear one for the 2K clear. It is a very toxic clear. Your lungs won't work too good clearcoated.

1 - I lightly sanded the primer with 600 wet or dry.
2 - Wiped down the pieces with a tack rag.
3 - Sprayed 3 coats of base. Flash time between coats 5 min. Let dry for 2 hrs.( photos 1 & 2 )
4 - Sprayed 3 coats of clear. Flash time between coats 10 min. (photos 3, 4, & 5 )
This clear is 2 component clear & after activated has a pot life of about 12 to 18 hrs. So make sure you have everything wanted to spray ready to go all at once. A description of the 2K clear is here 2K clear coat: Spraymax

Please don't beat me up too bad for the orange peal in photo 4, it really doesn't look too bad in real life.

Going to let it dry today & start to reassemble tomorrow.

Attached Images

	DSCF0163.JPG (117.3 KB, 76 views)
	DSCF0161.JPG (90.6 KB, 67 views)
	DSCF0164.JPG (120.9 KB, 68 views)
	DSCF0167.JPG (135.8 KB, 152 views)
	DSCF0166.JPG (199.5 KB, 172 views)

__________________