![]() |
I am about to tear out my dash to remove the bulb for this air bag. I have tried 4 different types of resistors. Testing on resistor leads on each
|
|||||||
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
|
#1 (permalink) |
|
Enthusiast Member
Join Date: May 2010
Location: Omaha NE
Posts: 272
Drives: 09 370Z PG M6
Rep Power: 27 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
I am about to tear out my dash to remove the bulb for this air bag. I have tried 4 different types of resistors. Testing on resistor leads on each end not connected and voltmeter on 200 OHM setting(lowest) it reads 5.4-5.5. Was thinking it should be 4.7. Idk. Each time I did the reset trick and this thing never works. I have the weight sensor plugged in from passenger seat and both clips in for airbags with the following resistors.
https://www.parts-express.com/47-ohm...0-pcs--002-4.7 Any ideas?
__________________
Injen cold air intakes, Ported upper and lower manifolds, OS Giken LSD, F1 Long Tube Headers, Magnaflow CBE. Natural Baby |
|
|
|
|
|
#2 (permalink) | |
|
A True Z Fanatic
Join Date: May 2015
Location: NJ
Age: 33
Posts: 3,758
Drives: 12 Base Sport
Rep Power: 54274 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Quote:
__________________
Stillen, AAM, Shine Auto, Fujimora, Swift, EVO-R, Carbon Fiber Element, Nitrous Outlet MECP Advanced: CEA26671 Most of what I post here are artistic works of fiction and falsehood. Only a fool would take anything I post here as fact. |
|
|
|
|
|
|
#3 (permalink) | |
|
A True Z Fanatic
Join Date: Sep 2011
Location: Irvine, CA
Posts: 2,594
Drives: 40thAE#472
Rep Power: 510 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Quote:
May we know why the positive and not the negative? I always disconnect the negative to reset. |
|
|
|
|
|
|
#4 (permalink) |
|
A True Z Fanatic
Join Date: May 2015
Location: NJ
Age: 33
Posts: 3,758
Drives: 12 Base Sport
Rep Power: 54274 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Actually the way I've always done resets is disconnecting both and touching the cables together. ALWAYS reset everything.
__________________
Stillen, AAM, Shine Auto, Fujimora, Swift, EVO-R, Carbon Fiber Element, Nitrous Outlet MECP Advanced: CEA26671 Most of what I post here are artistic works of fiction and falsehood. Only a fool would take anything I post here as fact. |
|
|
|
|
|
#5 (permalink) |
|
Premium Member
![]() Join Date: Nov 2010
Location: South Arkansas
Posts: 8,435
Drives: 2014 Challenger
Rep Power: 324199 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
A direct short like that can cause problems (the capacitors discharge too fast). Pressing on the brake pedal (or placing a fairly high resistance load between the terminals) will limit the amount of current. Granted, it's not a big problem with most modern electronics, but why take a chance?
__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma |
|
|
|
|
|
#6 (permalink) |
|
Premium Member
![]() Join Date: Nov 2010
Location: South Arkansas
Posts: 8,435
Drives: 2014 Challenger
Rep Power: 324199 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Doesn't matter. No need to wait 5 minutes - just press on the brake pedal for a second or two.
__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma |
|
|
|
![]() |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| airbag light? | JAYNO20 | Exterior & Interior | 1 | 05-15-2012 09:19 PM |
| AIRBAG LIGHT ON ! help ! | maurim3 | Exterior & Interior | 0 | 04-10-2012 07:52 PM |
| passenger airbag light | ThreeSeventyZ | Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs | 7 | 07-06-2011 06:59 PM |
| airbag light | fonZie | Audio & Video | 2 | 04-15-2011 04:10 PM |