![]() |
Draper , those 2 picture you just shown is one of APH and SGM , thats ok You said in your post when you posted the first time that this
|
|||||||
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
|
#1 (permalink) |
|
A True Z Fanatic
Join Date: Oct 2009
Location: Canada
Posts: 1,156
Drives: 370z
Rep Power: 25 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Draper ,
those 2 picture you just shown is one of APH and SGM , thats ok You said in your post when you posted the first time that this one was 1 pull from the base pull and then a pull with the APH tuned one ofcourse you will have the big gain from the base tune... and the one on SGM was with Sasha tuned map and your Cobb map which is already tuned from them,, since you came in his shop with an afr 12,5 from the factory the 370z run lean ,, not rich like that , you even have breather mod and exhaust ,, if you wasn't tuned when you went to SGM ,, you would have been in the 14.x AFR then the big gain would have shown like APH in his graph |
|
|
|
|
|
#2 (permalink) |
|
A True Z Fanatic
Join Date: Oct 2009
Location: Canada
Posts: 1,156
Drives: 370z
Rep Power: 25 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
on a side note ..
no I did not bought the M370 from MotorDyne I bought an used 350z HR intake manifold with both Throttle body for my projet Since someone showed the picture of their M370 . i took advantage of it and Did the modification myself , I dont see myself buying the same item for 900 $ when I bought it for 100$ |
|
|
|
|
|
#3 (permalink) |
|
A True Z Fanatic
Join Date: Oct 2009
Location: Canada
Posts: 1,156
Drives: 370z
Rep Power: 25 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
aaaa I hate missing stuff
sorry Draper I do not have what you are asking since the only sheet I have with me is the last one I got the last time I went to SGM and I didnt ask to have the one from the first time he tuned me . if you add the gain I had the first time and the gain I got the second time it should average between 5 to 13hp / tq those are my word and dont put to much weight on it because I go from memory but I do remember the first time I got in at 268 whp and left at 280 whp (6800rpm) and droping !!! since i do not have a CAI Im pulling vacuum from 6400 rpm to Redline.. which mean there is a restriction in the OEM Intake system with the freeflow exhaust I have |
|
|
|
|
|
#4 (permalink) |
|
A True Z Fanatic
Join Date: Oct 2009
Location: Canada
Posts: 1,156
Drives: 370z
Rep Power: 25 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
just to throw something
here is my first Dyno with my 370z at APH the car had no mod or tune , 100% stock the gear ratio is correct I did 5 pull and those 2 there are the lowest and the highest one you can see a big difference Pull # 2 gave the Biggest number and pull #5 gave the lowest one. always do more than 2 pull to check the accuracy of the tune...
|
|
|
|
![]() |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| AZ Uprev Tuners? | Endgame | Tuning | 0 | 11-17-2010 07:44 AM |
| Recommened Tuners in Socal | TheJumpOff | Tuning | 5 | 05-22-2010 04:55 PM |
| NNJ Tuners | jbuzz | North East Region | 13 | 04-09-2010 12:03 PM |
| Respectable tuners | Seth G | Tuning | 15 | 04-03-2010 08:40 PM |
| Know of Any Good Tuners in AL? | myfirstz | Tuning | 1 | 08-03-2009 10:04 AM |