Base model with akebono upgrade. Which ss lines?

MarlinZ · 09-10-2013, 01:47 AM

So I've got a base 370 with the akebono BBk. My question is what would be the best ss lines to go with? Thank you for any help/suggestions.

osbornsm · 09-10-2013, 11:23 AM

Best choice would be none... it's $200 that you'll not get a return on.

Upgrade to Motul RBF600 fluid and you'll be ready to go

Chuck33079 · 09-10-2013, 11:29 AM

I've got a set of Z1 lines. They look great, but I haven't put them on yet. Just make sure they're coated, and not just bare SS.

I'm not getting into the "Are SS lines worth it" debate. I've used them on many cars, and always had a firmer pedal afterward. Pedal feel is all you'll get out of the deal, but it's worth it to me.

MarlinZ · 09-10-2013, 08:09 PM

Thank you guys for the input. I appreciate it.

Rusty · 09-11-2013, 06:58 PM

I got the Z1 lines.

synolimit · 09-11-2013, 08:02 PM

Z1 here

axmea? · 09-11-2013, 11:27 PM

in addition to Z1
G Spec -- $140
Helo (from Europe) -- under $200
StopTech -- $150
Goodridge -- $175

DEpointfive0 · 09-12-2013, 12:28 AM

Get Joe@ZSpeed's

Leuz · 09-16-2013, 09:56 PM

Exactly the post I was searching for. I'm going for my first A-X event and I'm trying to figure out which SS lines for my Akebono brakes (on 2013 model),
I've been looking at Goodridge (I guess too expensive for my case), Z1 and these ZSpeed's look interesting too as they are coated.
OP, which ones did you go for?

MarlinZ · 09-16-2013, 10:36 PM

I went with the premium z1

MarlinZ · 09-16-2013, 10:37 PM

Thank you guys for your help and input

synolimit · 09-17-2013, 12:33 AM

Quote:

Originally Posted by Leuz

Exactly the post I was searching for. I'm going for my first A-X event and I'm trying to figure out which SS lines for my Akebono brakes (on 2013 model),
I've been looking at Goodridge (I guess too expensive for my case), Z1 and these ZSpeed's look interesting too as they are coated.
OP, which ones did you go for?

I'm the first 13 to install SS lines. The 13 is different than all. Z1 will be the only person to have what you need. I waited 3 weeks for them to build them for me.

Leuz · 09-17-2013, 12:46 AM

Thanks for the info, apparently also ZSpeed have them for the 2013.

Update: ok for future reference I pulled the trigger on the ZSpeed ones

09-10-2013, 01:47 AM	#1 (permalink)
MarlinZ Enthusiast Member Join Date: May 2013 Location: Ukiah,Ca Posts: 300 Drives: '10 370Z PG M6 Rep Power: 11	Base model with akebono upgrade. Which ss lines? So I've got a base 370 with the akebono BBk. My question is what would be the best ss lines to go with? Thank you for any help/suggestions.

09-10-2013, 11:23 AM	#2 (permalink)
osbornsm A True Z Fanatic Join Date: Jun 2011 Location: WHAT Posts: 2,551 Drives: 2018 Camaro SS 1LE Rep Power: 423	Best choice would be none... it's $200 that you'll not get a return on. Upgrade to Motul RBF600 fluid and you'll be ready to go __________________ 2018 Camaro SS 1LE (455hp) - 2011 Nissan 370z (333hp) - 2004 VW R32 (240hp) - 2000 Civic Si (160hp)

09-10-2013, 11:29 AM	#3 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29538	I've got a set of Z1 lines. They look great, but I haven't put them on yet. Just make sure they're coated, and not just bare SS. I'm not getting into the "Are SS lines worth it" debate. I've used them on many cars, and always had a firmer pedal afterward. Pedal feel is all you'll get out of the deal, but it's worth it to me. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

09-11-2013, 06:58 PM	#5 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 34,865 Drives: 2011 Nismo GM 6M Rep Power: 2684436	I got the Z1 lines. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

09-11-2013, 08:02 PM	#6 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3388	Z1 here __________________ 13 370z-

09-10-2013, 08:09 PM	#4 (permalink)
MarlinZ Enthusiast Member Join Date: May 2013 Location: Ukiah,Ca Posts: 300 Drives: '10 370Z PG M6 Rep Power: 11	Thank you guys for the input. I appreciate it.

09-11-2013, 11:27 PM	#7 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,233 Drives: WELL ZED PW 6MT Rep Power: 53241	in addition to Z1 G Spec -- $140 Helo (from Europe) -- under $200 StopTech -- $150 Goodridge -- $175 __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete

09-12-2013, 12:28 AM	#8 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	Get Joe@ZSpeed's __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

09-16-2013, 09:56 PM	#9 (permalink)
Leuz Track Member Join Date: Nov 2012 Location: NorCal Posts: 555 Drives: Bunny Rep Power: 13	Exactly the post I was searching for. I'm going for my first A-X event and I'm trying to figure out which SS lines for my Akebono brakes (on 2013 model), I've been looking at Goodridge (I guess too expensive for my case), Z1 and these ZSpeed's look interesting too as they are coated. OP, which ones did you go for? __________________ 2013 PW 370Z Touring+Sport, NAV Tint 35% side, 18% back \| RJM clutch pedal \| ZSpeed SS lines \| Stillen Gen3 CAI \| Fast Intentions HFC and TDX 12'' CF CBE \| UpRev

09-16-2013, 10:36 PM	#10 (permalink)
MarlinZ Enthusiast Member Join Date: May 2013 Location: Ukiah,Ca Posts: 300 Drives: '10 370Z PG M6 Rep Power: 11	I went with the premium z1

09-16-2013, 10:37 PM	#11 (permalink)
MarlinZ Enthusiast Member Join Date: May 2013 Location: Ukiah,Ca Posts: 300 Drives: '10 370Z PG M6 Rep Power: 11	Thank you guys for your help and input

09-17-2013, 12:46 AM	#13 (permalink)
Leuz Track Member Join Date: Nov 2012 Location: NorCal Posts: 555 Drives: Bunny Rep Power: 13	Thanks for the info, apparently also ZSpeed have them for the 2013. Update: ok for future reference I pulled the trigger on the ZSpeed ones __________________ 2013 PW 370Z Touring+Sport, NAV Tint 35% side, 18% back \| RJM clutch pedal \| ZSpeed SS lines \| Stillen Gen3 CAI \| Fast Intentions HFC and TDX 12'' CF CBE \| UpRev Last edited by Leuz; 09-17-2013 at 08:08 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Akebono Sport upgrade from base brakes	Drodriguez06	Brakes & Suspension	39	07-01-2014 11:03 PM
19inch wheel upgrade from the 18inch Base model wheels question	TheodoreYoo	Wheels & Tires	9	11-02-2012 06:42 PM
Base model brake rotor upgrade question	TonyBPD	Brakes & Suspension	6	07-21-2011 03:03 PM
Anyone want a base model upgrade to Nismo?	holmanyu	Nissan 370Z General Discussions	15	08-02-2010 03:23 PM