06-28-2012, 07:28 PM
|
#1 (permalink)
|
|
A True Z Fanatic
Join Date: Aug 2010
Location: Lawrenceville,Ga
Posts: 4,293
Drives: My foot up your azz
Rep Power: 31
|
Quote:
Originally Posted by MattP725
Gravity works but not if the master is dry due to the abs system. No reason to bench bleed the MC. A vacuum bleeder on the calipers will run the fluid through everything.
I did this on my 40th after letting it run dry by accident (I use a pump connected to my compressor so I got distracted).
|
If the M/C runs dry vacuum bleeding them won't help at all,the M/C must be bench bled B/C of the angle it is at when it's on the car there for if you don't bench bleed it you will have a pocket of air in the very front of the M/C,that's why people bench bleed M/C before install.
__________________
2013 ZL1
754 rwhp 747 rwtq 
|
|
|
Similar Threads
Hybrid Mode
