H&R or Swift Springs?

BudzZz · 03-08-2012, 12:11 PM

I just received my H&R springs with the SPC rear camber kit but still waiting for my Fast Intentions Catback exhaust to arrive and i'll post the pics of all these parts installed soon enough for all those who were wondering about this setp up.

I myself was looking all over the place to find pics of all these parts installed to see the stance of the beast !

ClemsonWill · 03-08-2012, 02:03 PM

If you go FI exhaust you probably won't want to drop any more than the H&Rs. Mine hits under aggressive mountain runs and I'm on H&Rs.

UNKNOWN_370 · 03-08-2012, 02:18 PM

Quote:

Originally Posted by ClemsonWill

If you go FI exhaust you probably won't want to drop any more than the H&Rs. Mine hits under aggressive mountain runs and I'm on H&Rs.

It might be your springs? Most say you have 1.5" clearance to drop before you run into issues on the 2nd gen FI exhaust. The swifts are 1" in the rear. Tein's or Eibach Sportline would be too low.

ClemsonWill · 03-09-2012, 10:18 AM

Quote:

Originally Posted by UNKNOWN_370

It might be your springs? Most say you have 1.5" clearance to drop before you run into issues on the 2nd gen FI exhaust. The swifts are 1" in the rear. Tein's or Eibach Sportline would be too low.

1.5" is not much clearance when you are pushing the car hard on the street. Just my

Viera · 03-11-2012, 04:14 PM

Quote:

Originally Posted by ClemsonWill

1.5" is not much clearance when you are pushing the car hard on the street. Just my

^This. I hit my cans a couple times on mountain runs as well..

zellsexy · 12-28-2012, 04:22 PM

Do you guys know if the swift will rub with a 275/35/19 305/30/19 setup?

synolimit · 07-01-2013, 06:22 PM

Quote:

Originally Posted by zellsexy

Do you guys know if the swift will rub with a 275/35/19 305/30/19 setup?

Anyone?

Sh0velMan · 07-01-2013, 06:25 PM

Quote:

Originally Posted by zellsexy

Do you guys know if the swift will rub with a 275/35/19 305/30/19 setup?

Probably depends more on the wheel and offset than the tire.

Z_Society · 06-20-2013, 11:23 AM

Just installed my H&R springs and gotta say i love, read a lot of reviews on here that said it was a bad DD or it was too low but its a perfect drop and no rub at all

BrandonSS · 06-20-2013, 11:52 AM

I love my H&Rs but they are low. The front chin spoiler is abused with dips in the road and simple rolled driveway curbs.

zfamous · 07-01-2013, 03:55 PM

Recently saw Tanabe post a 370 on some GF210's. The drop looks pretty decent. Not to low and even gap all around.

03-08-2012, 02:03 PM	#2 (permalink)
ClemsonWill A True Z Fanatic Join Date: Jul 2010 Location: Charleston, SC Posts: 12,045 Drives: a Civic VP! Rep Power: 446	If you go FI exhaust you probably won't want to drop any more than the H&Rs. Mine hits under aggressive mountain runs and I'm on H&Rs. __________________ Slightly modded

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Swift springs review!!!!!	CFZ	Brakes & Suspension	2166	09-10-2020 01:58 AM
RS-R springs?	GTRFAN	Brakes & Suspension	74	03-08-2012 08:41 AM
BC ERs with Swift Springs and RA Valving REVIEW / (Picture Heavy)	Mozen	Brakes & Suspension	31	05-24-2011 10:46 AM
SWIFT Springs in Production	wishihadnav	Brakes & Suspension	200	02-01-2011 02:34 PM
Eibach springs vs H&R springs	xbigb4ller69z	Brakes & Suspension	8	07-27-2010 08:02 AM

03-08-2012, 12:11 PM	#1 (permalink)
BudzZz Base Member Join Date: Feb 2012 Location: Montreal Canada Posts: 56 Drives: 2012 Subaru Sti Rep Power: 15	I just received my H&R springs with the SPC rear camber kit but still waiting for my Fast Intentions Catback exhaust to arrive and i'll post the pics of all these parts installed soon enough for all those who were wondering about this setp up. I myself was looking all over the place to find pics of all these parts installed to see the stance of the beast !

12-28-2012, 04:22 PM	#6 (permalink)
zellsexy Base Member Join Date: Aug 2009 Location: la Posts: 152 Drives: 370z Rep Power: 17	Do you guys know if the swift will rub with a 275/35/19 305/30/19 setup?

07-01-2013, 03:55 PM	#11 (permalink)
zfamous Base Member Join Date: Apr 2013 Location: Southern, CA Posts: 13 Drives: 370z Rep Power: 14	Recently saw Tanabe post a 370 on some GF210's. The drop looks pretty decent. Not to low and even gap all around.