Swift springs review!!!!!

Zipper 104 · 10-24-2014, 07:37 PM

Quote:

Originally Posted by KaienZ34

Not two sets, one pair of rear camber arms SPL Titanium Rear Camber Links (370Z / G37) and one pair of front upper control arms SPL Front Upper Control Arms (370Z / G37) and rear toe bolts SPC Rear Camber Cam Bolts (370Z / G37)

You might not Need all of these, at least get the rear camber arms and toe bolts...Brand(s) of your choice of course.

Oh, OK.
I didn't think I'd need two pairs/sets until it came up earlier in the thread.
My plan is to go with the SPL camber arms and toe bolts and pass on the front upper control arms unless it turns out I need them.

Thanks.

104

Brad370 · 10-25-2014, 03:35 PM

Did anyone install the Swift Springs thrust sheets from their website (Swift Springs USA)? Has anyone had squeaky springs after the install?

I'm about to pull the trigger on the Swifts, H&R spacers, and SPC rear camber/toe kit. I just want to make sure once I get it all in there that it will be quiet. Right now I get a bit of creaking from my Nismo springs.

KamiSpeed · 10-27-2014, 11:08 AM

Quote:

Originally Posted by Brad370

Did anyone install the Swift Springs thrust sheets from their website (Swift Springs USA)? Has anyone had squeaky springs after the install?

I'm about to pull the trigger on the Swifts, H&R spacers, and SPC rear camber/toe kit. I just want to make sure once I get it all in there that it will be quiet. Right now I get a bit of creaking from my Nismo springs.

The Swift thrust sheet only work with coilover springs. With inner diameters of 60|65|70mm. They will not work with the Lowering springs.

Shoot me a PM and I can help you with all those items, no problem.

jsutton2 · 10-28-2014, 02:26 PM

Wen't back to the shop and they added some wire wrap on the bottom of both front springs, cleaned up the perches, and added lithium grease to places on the perch as well. No noise after that!!

I hope it lasts...

They said there was already rubber on the top, so they didn't add anymore.

Got a re-alignment while I was there too.

BOLIO 671 · 11-04-2014, 08:03 PM

Anyone know what the turn around time is if you order these from Kamispeed?

KamiSpeed · 11-05-2014, 11:33 AM

Quote:

Originally Posted by BOLIO 671

Anyone know what the turn around time is if you order these from Kamispeed?

Yeah depending on where you are located in the US. Typically within the week. Or early the following, when ordered.

Send me a PM and I can help you out

R3V · 11-04-2014, 08:24 PM

I got mine in a few days.

NORAIN · 11-05-2014, 04:40 AM

Quote:

Originally Posted by R3V

I got mine in a few days.

Same here.

SpeedLimit55 · 11-05-2014, 10:52 PM

Nice. I can't wait to get mine lower.

/Angelo350Z/ · 11-06-2014, 07:31 AM

The very conservative Eibach Pro-Kit springs (on the Z33) drop the car a bit more. The Swift springs (on the Z34), on the other hand, provide superior damping and comfort.

Swift

Eibach

mts · 11-07-2014, 07:10 AM

Swift springs with 20/25 spacers. I enjoy the combo of the Swifts + the stock sport shocks. Works really well for the street. If anything I wish it didn't lower the car quite so much. If I could take it back up 1/2" or so I would.

Brad370 · 12-30-2014, 09:38 AM

Can anyone recommend a spring compressor that works on the Nismo and Swift springs? I saw in a write up on here that the tight spacing makes it difficult. I also don't want some cheap piece of crap that's going to fall apart.

sandersd · 12-30-2014, 12:08 PM

Quote:

Originally Posted by Brad370

Can anyone recommend a spring compressor that works on the Nismo and Swift springs? I saw in a write up on here that the tight spacing makes it difficult. I also don't want some cheap piece of crap that's going to fall apart.

Swift Spring Install Issues

KamiSpeed · 04-17-2015, 05:44 PM

Quote:

Originally Posted by mts

Swift springs with 20/25 spacers. I enjoy the combo of the Swifts + the stock sport shocks. Works really well for the street. If anything I wish it didn't lower the car quite so much. If I could take it back up 1/2" or so I would.

This setup here is about perfect! Love the look of it man.

Bulletz4break · 04-18-2015, 08:04 AM

Are these still the favorite among lowering springs? It seems like no one carries them.

10-25-2014, 03:35 PM	#2 (permalink)
Brad370 Base Member Join Date: Aug 2011 Location: online Posts: 102 Drives: car Rep Power: 15	Thrust Sheets Did anyone install the Swift Springs thrust sheets from their website (Swift Springs USA)? Has anyone had squeaky springs after the install? I'm about to pull the trigger on the Swifts, H&R spacers, and SPC rear camber/toe kit. I just want to make sure once I get it all in there that it will be quiet. Right now I get a bit of creaking from my Nismo springs.

10-28-2014, 02:26 PM	#4 (permalink)
jsutton2 Base Member Join Date: Jul 2014 Location: Austin Posts: 239 Drives: 2010 370Z Sport Rep Power: 12	Wen't back to the shop and they added some wire wrap on the bottom of both front springs, cleaned up the perches, and added lithium grease to places on the perch as well. No noise after that!! I hope it lasts... They said there was already rubber on the top, so they didn't add anymore. Got a re-alignment while I was there too. __________________ 2010 Brilliant Silver 370z Sport - 08/01/2014 - And so it begins... Last edited by jsutton2; 10-28-2014 at 02:26 PM. Reason: spelling...

11-04-2014, 08:03 PM	#5 (permalink)
BOLIO 671 A True Z Fanatic Join Date: Mar 2010 Location: GUAHAN Posts: 1,198 Drives: To & From then Back Rep Power: 3400	Anyone know what the turn around time is if you order these from Kamispeed? __________________ 2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34

11-06-2014, 07:31 AM	#10 (permalink)
/Angelo350Z/ A True Z Fanatic Join Date: Feb 2013 Location: Germany Posts: 2,230 Drives: Z34 \| MK7 \| F82 Rep Power: 3661	The very conservative Eibach Pro-Kit springs (on the Z33) drop the car a bit more. The Swift springs (on the Z34), on the other hand, provide superior damping and comfort. Swift Eibach __________________ 2013 MB NISSAN 370Z SPORT

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Swift Springs-- Nismo Review!!	JJ-NISMO	Brakes & Suspension	39	07-29-2014 07:59 AM
[WTB] Swift Springs	Beastmode	Parts for sale (Private Classifieds)	1	09-13-2011 04:46 PM
BC ERs with Swift Springs and RA Valving REVIEW / (Picture Heavy)	Mozen	Brakes & Suspension	31	05-24-2011 10:46 AM
WTB: Swift or H&R Springs	Mr&Mrs	Wanted	5	04-26-2011 10:51 PM
Swift Springs	Justin1686	North East Region	10	02-24-2011 06:58 PM

11-04-2014, 08:24 PM	#7 (permalink)
R3V Base Member Join Date: Jan 2014 Location: Orlando Posts: 180 Drives: 11 370Z Pearl White Rep Power: 12	I got mine in a few days.

11-05-2014, 10:52 PM	#9 (permalink)
SpeedLimit55 Base Member Join Date: Oct 2014 Location: Florida Posts: 51 Drives: Slowww Rep Power: 11	Nice. I can't wait to get mine lower.

12-30-2014, 09:38 AM	#12 (permalink)
Brad370 Base Member Join Date: Aug 2011 Location: online Posts: 102 Drives: car Rep Power: 15	Can anyone recommend a spring compressor that works on the Nismo and Swift springs? I saw in a write up on here that the tight spacing makes it difficult. I also don't want some cheap piece of crap that's going to fall apart.

04-18-2015, 08:04 AM	#15 (permalink)
Bulletz4break Base Member Join Date: Jan 2015 Location: Pittsburgh Posts: 101 Drives: 2011 370z Rep Power: 11	Are these still the favorite among lowering springs? It seems like no one carries them.