08-08-2012, 08:10 PM
|
#3 (permalink)
|
Track Member
Join Date: May 2010
Location: Spring Hill, FL
Posts: 547
Drives: 09 7AT 370Z
Rep Power: 17
|
Quote:
Originally Posted by Yutnaka
Have you scraped the exhaust with this setup? I have Berks too and am a little concerned about scraping the low point on the exhaust.
|
I was a little worried about scraping because the exhaust does hang kind of low just in front of the muffler...but I've gone over some decent sized speed bumps and haven't heard anything either (and that's with going over it slow with the radio off and windows down).
Quote:
Originally Posted by speedfreek
They really rub. Angles are your best friend but if your slammed some obstacles become impossible. The swift springs are perfect IMO.
Joshs09slvrZ, looking good bro!
|
Thanks man!!
Quote:
Originally Posted by Pintsize725
No camber kit?
|
Nope...they were able to get the alignment back to within specs I am ok with. I'm totally ok with a little extra camber in the back than what the spec is.
__________________
Stillen Gen3 CAI|Berk HFC and CBE|UpRev|15mm H&R front spacers|20mm Ichiba rear spacers|Stillen front and rear sway bars|Yokohama S. Drives|Swift springs|JDM Blinking Fog|8000k HIDs|9% window tinting, 47% on full windshield
|
|
|