![]() |
Originally Posted by tjlazer Exactly. Why throw away $1,000+ for coils if you are not going to track and race the car. The springs are GREAT for a street car!
|
|||||||
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
|
#1 (permalink) |
|
A True Z Fanatic
Join Date: Jan 2012
Location: Strangeland
Posts: 1,054
Drives: 09 370z
Rep Power: 75 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Not to mention that the oem/swift setup will handle better than the cheapo coilovers (<$1200). A lot of the cheaper coilovers dont have very good valving and are made primarily to go low. Not all of them, but most. Ill probably be getting coilovers in the future for aesthetics, but if I were going to track the Z I would go with some koni yellows/swift and some sway bars vs (cheaper) coilovers.
__________________
2009 370z touring w/sports package |
|
|
|
|
|
#2 (permalink) | |
|
A True Z Fanatic
Join Date: Jan 2009
Location: Jersey
Age: 46
Posts: 4,855
Drives: to acquire tickets
Rep Power: 3526 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Quote:
I love my Koni / Swift setup
__________________
Ryan 314WHP | 260LB-FT | STILLEN | KONI | SWIFT | STOPTECH | Z1 | PROJECT MU | CNT | UPREV | FORGESTAR | BRIDGESTONE | PWJDM | ENEOS | MOTUL |
|
|
|
|
|
|
#3 (permalink) |
|
A True Z Fanatic
![]() Join Date: Apr 2010
Location: Battle Lake MN
Age: 65
Posts: 183,964
Drives: 370Z 240Z
Rep Power: 2684738 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Koni/Swift is the way to go.
__________________
Koni|Swift|Michelin|Motordyne|Berk|RJM Performance|Gates|SPL|Motul|Technafit|Ate Super Blue|Hawk
Tommy Kaira|Momo|Optima|Hella|Hotchkis|Red Line|ZSpeed|Stillen|B&M|H&R |
|
|
|
|
|
#4 (permalink) |
|
A True Z Fanatic
Join Date: Jan 2009
Location: Jersey
Age: 46
Posts: 4,855
Drives: to acquire tickets
Rep Power: 3526 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
YES
![]() But of course
__________________
Ryan 314WHP | 260LB-FT | STILLEN | KONI | SWIFT | STOPTECH | Z1 | PROJECT MU | CNT | UPREV | FORGESTAR | BRIDGESTONE | PWJDM | ENEOS | MOTUL |
|
|
|
|
|
#6 (permalink) |
|
A True Z Fanatic
Join Date: Jan 2009
Location: Jersey
Age: 46
Posts: 4,855
Drives: to acquire tickets
Rep Power: 3526 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
The Koni's did SLIGHTLY drop it more. Maybe a 1/4 inch or so. They are adjustable so the ride is what you make of it. Although, on full soft they are still pretty stiff. I could care less about ride quality personally. Im more about gettin at them twisties
__________________
Ryan 314WHP | 260LB-FT | STILLEN | KONI | SWIFT | STOPTECH | Z1 | PROJECT MU | CNT | UPREV | FORGESTAR | BRIDGESTONE | PWJDM | ENEOS | MOTUL |
|
|
|
|
|
#7 (permalink) |
|
A True Z Fanatic
![]() Join Date: Apr 2010
Location: Battle Lake MN
Age: 65
Posts: 183,964
Drives: 370Z 240Z
Rep Power: 2684738 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
The Koni's supposedly drop the fronts an additional 1/2 inch or so, but I cannot testify to that because I did not measure before and after. I ran my Swifts only for a couple of months before I installed the Koni's and cannot really tell if I am lower or not.
As far as how stiff -- remember that that the Koni is adjustable. I initially set my rears at the halfway point and the fronts one click more firm than the rear. This was a little too stiff and after a month with this setting. I equally softened front and rear by one click and they are right on the money now.
__________________
Koni|Swift|Michelin|Motordyne|Berk|RJM Performance|Gates|SPL|Motul|Technafit|Ate Super Blue|Hawk
Tommy Kaira|Momo|Optima|Hella|Hotchkis|Red Line|ZSpeed|Stillen|B&M|H&R |
|
|
|
|
|
#9 (permalink) |
|
A True Z Fanatic
![]() Join Date: Apr 2010
Location: Battle Lake MN
Age: 65
Posts: 183,964
Drives: 370Z 240Z
Rep Power: 2684738 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
You will be happy with the results. I am sure of it.
__________________
Koni|Swift|Michelin|Motordyne|Berk|RJM Performance|Gates|SPL|Motul|Technafit|Ate Super Blue|Hawk
Tommy Kaira|Momo|Optima|Hella|Hotchkis|Red Line|ZSpeed|Stillen|B&M|H&R |
|
|
|
|
|
#10 (permalink) |
|
A True Z Fanatic
Join Date: Jan 2009
Location: Jersey
Age: 46
Posts: 4,855
Drives: to acquire tickets
Rep Power: 3526 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
__________________
Ryan 314WHP | 260LB-FT | STILLEN | KONI | SWIFT | STOPTECH | Z1 | PROJECT MU | CNT | UPREV | FORGESTAR | BRIDGESTONE | PWJDM | ENEOS | MOTUL |
|
|
|
![]() |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Swift Springs-- Nismo Review!! | JJ-NISMO | Brakes & Suspension | 39 | 07-29-2014 07:59 AM |
| [WTB] Swift Springs | Beastmode | Parts for sale (Private Classifieds) | 1 | 09-13-2011 04:46 PM |
| BC ERs with Swift Springs and RA Valving REVIEW / (Picture Heavy) | Mozen | Brakes & Suspension | 31 | 05-24-2011 10:46 AM |
| WTB: Swift or H&R Springs | Mr&Mrs | Wanted | 5 | 04-26-2011 10:51 PM |
| Swift Springs | Justin1686 | North East Region | 10 | 02-24-2011 06:58 PM |