Swift springs review!!!!!

Tauruszguy · 04-06-2011, 03:19 PM

Before

After

Red__Zed · 04-06-2011, 03:25 PM

Quote:

Originally Posted by Tauruszguy

[IMG]http://www.the370z.com/members/tauruszguy-albums-silver-spoon-picture25646-a.jpg[/MG] Before

[IMG]http://www.the370z.com/members/tauruszguy-albums-silver-spoon-picture31103-swift2.jpg[IMG] After

Nice. How did camber come in?

Tauruszguy · 04-06-2011, 03:39 PM

Quote:

Originally Posted by Red__Zed

Nice. How did camber come in?

Going to wait a week and let them settle before alignment. I'll be sure to post the results.

bigdog1250 · 04-06-2011, 04:11 PM

Can't wait to get my springs next Tuesday and throw them on next weekend. I just sold my motorcycle today

so I need some sort of emotional boost. It's going to look good with the 15 x 20mm H&R spacers!

Pics and review to come people

Osiris · 04-06-2011, 04:18 PM

fyi guys, you will need camber for rear...i haven't purchased the camber kit yet, but i plan to. The front was only very slightly off.

tjlazer · 04-06-2011, 05:02 PM

Quote:

Originally Posted by Osiris

fyi guys, you will need camber for rear...i haven't purchased the camber kit yet, but i plan to. The front was only very slightly off.

I didn't need one and I was able to get the camber to -1.9 on the rears. That was whithin spec. Every car is different. What is your camber?

Red__Zed · 04-06-2011, 05:05 PM

Quote:

Originally Posted by Osiris

fyi guys, you will need camber for rear...i haven't purchased the camber kit yet, but i plan to. The front was only very slightly off.

What were your camber #'s?

Osiris · 04-06-2011, 05:26 PM

My bad guys, it just dawned on me that I may need the camber kit 'cause I'm running different wheels than stock. Sorry I don't remember the camber numbers I got, I just know they were off. Guess ill just have to add the camber kit cost to the price of getting new wheels!

bigdog1250 · 04-06-2011, 05:54 PM

Yea i've heard to hold off on the camber kit as most people are able to get within spec. Plus with spacers things tend to change.

christian370z · 04-06-2011, 06:52 PM

Quote:

Originally Posted by tjlazer

I didn't need one and I was able to get the camber to -1.9 on the rears. That was whithin spec. Every car is different. What is your camber?

Same here, I came in at -1.9 in the rear which is not aggressive enough to make me consider camber arms.

Baer383 · 04-06-2011, 08:10 PM

Have any of you guys had a issue with ride height.

My car is .25 higher on the right front.
and .25 higher on the right rear.

When I installed these I had no problems at all and I drove it and double checked everything and still find this puzzling.

LunaZ · 04-06-2011, 09:16 PM

Mine are due to arrive on the 11th according to the tracking e-mail I got from KamiSpeed. My 15mm H&R spacers for the front wheels arrived today and I'm in the queue for powdercoated brakes from Mike.

Unfortunately, I wont be able to tackle my spring install for a couple of weeks. I'm off to London for work!

christian370z · 04-07-2011, 01:21 AM

I can't remember which side it is, but one side of the car is slightly higher than the other and I believe that is the driver's side to compensate for the weight of the driver.

Baer383 · 04-07-2011, 06:47 AM

Quote:

Originally Posted by christian370z

I can't remember which side it is, but one side of the car is slightly higher than the other and I believe that is the driver's side to compensate for the weight of the driver.

But my side is pass side,and these springs are marked front and back not left and right.
That's why I was curious . 25 isn't much I was just checking to see if any of you have had this issue.

370zjames · 04-09-2011, 03:49 AM

Quote:

Originally Posted by Baer383

But my side is pass side,and these springs are marked front and back not left and right.
That's why I was curious . 25 isn't much I was just checking to see if any of you have had this issue.

My drop was un even!@ BUt after 200miles driving,

IT just got settled some how!!

04-06-2011, 03:19 PM	#1 (permalink)
Tauruszguy Base Member Join Date: Jun 2009 Location: Bolingbrook IL Posts: 90 Drives: 09 370z PG M6 SP Rep Power: 18	Before After __________________ 2009 370Z PG SP 6MT, I. Kplates, K&N, FI CBE 12" Res , Berk HFC, Swift Spec-R, H&R

04-06-2011, 04:11 PM	#4 (permalink)
bigdog1250 Track Member Join Date: Nov 2008 Location: San Francisco Posts: 846 Drives: 991.2 GT3 Rep Power: 19	Can't wait to get my springs next Tuesday and throw them on next weekend. I just sold my motorcycle today so I need some sort of emotional boost. It's going to look good with the 15 x 20mm H&R spacers! Pics and review to come people __________________ 350z / 40th 370z / C6 Z06 / BMW M4 / V10 R8 / C7 Grand Spot / 997.1 GT3 / S2K / Camaro ZL1 / 718 GTS / 991.2 GT3

04-06-2011, 04:18 PM	#5 (permalink)
Osiris A True Z Fanatic Join Date: Mar 2009 Location: http://www.cfzclub.com/ Posts: 1,524 Drives: Angry Rep Power: 21	fyi guys, you will need camber for rear...i haven't purchased the camber kit yet, but i plan to. The front was only very slightly off. __________________ ^^^^^^^^^Like our Facebook!^^^^^^^^^

04-06-2011, 05:26 PM	#8 (permalink)
Osiris A True Z Fanatic Join Date: Mar 2009 Location: http://www.cfzclub.com/ Posts: 1,524 Drives: Angry Rep Power: 21	My bad guys, it just dawned on me that I may need the camber kit 'cause I'm running different wheels than stock. Sorry I don't remember the camber numbers I got, I just know they were off. Guess ill just have to add the camber kit cost to the price of getting new wheels! __________________ ^^^^^^^^^Like our Facebook!^^^^^^^^^

04-06-2011, 05:54 PM	#9 (permalink)
bigdog1250 Track Member Join Date: Nov 2008 Location: San Francisco Posts: 846 Drives: 991.2 GT3 Rep Power: 19	Yea i've heard to hold off on the camber kit as most people are able to get within spec. Plus with spacers things tend to change. __________________ 350z / 40th 370z / C6 Z06 / BMW M4 / V10 R8 / C7 Grand Spot / 997.1 GT3 / S2K / Camaro ZL1 / 718 GTS / 991.2 GT3

04-06-2011, 08:10 PM	#11 (permalink)
Baer383 A True Z Fanatic Join Date: Aug 2010 Location: Lawrenceville,Ga Posts: 4,293 Drives: My foot up your azz Rep Power: 32	Have any of you guys had a issue with ride height. My car is .25 higher on the right front. and .25 higher on the right rear. When I installed these I had no problems at all and I drove it and double checked everything and still find this puzzling. __________________ 2013 ZL1 754 rwhp 747 rwtq

04-06-2011, 09:16 PM	#12 (permalink)
LunaZ A True Z Fanatic Join Date: Mar 2010 Location: Vagabond Posts: 6,704 Drives: Project: a white one Rep Power: 514	Mine are due to arrive on the 11th according to the tracking e-mail I got from KamiSpeed. My 15mm H&R spacers for the front wheels arrived today and I'm in the queue for powdercoated brakes from Mike. Unfortunately, I wont be able to tackle my spring install for a couple of weeks. I'm off to London for work! __________________ 2009 370Z Sport/Touring/Navigation \| see my journal for mods facebook: Be my friend... or not.

04-07-2011, 01:21 AM	#13 (permalink)
christian370z A True Z Fanatic Join Date: Jul 2010 Location: Newport Beach Posts: 3,900 Drives: 2010 370Z/Saab 900se Rep Power: 434	I can't remember which side it is, but one side of the car is slightly higher than the other and I believe that is the driver's side to compensate for the weight of the driver. __________________ -320whp / 259wftlbs- SP Rays -- RE-11s -- SpecialtyZ Tune -- Swift Springs -- Stillen 25R Oil Cooler -- Stillen G3 Intakes -- Berk HFCs -- F.I. 12" CBE -- Stillen Sway Bars -- Es14 Spring -- INGS+1 lip -- CF Spoiler -- GTR Start Button -- VLED Parking Lights -- PWJDM V2 shift knob

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Swift Springs-- Nismo Review!!	JJ-NISMO	Brakes & Suspension	39	07-29-2014 07:59 AM
[WTB] Swift Springs	Beastmode	Parts for sale (Private Classifieds)	1	09-13-2011 04:46 PM
BC ERs with Swift Springs and RA Valving REVIEW / (Picture Heavy)	Mozen	Brakes & Suspension	31	05-24-2011 10:46 AM
WTB: Swift or H&R Springs	Mr&Mrs	Wanted	5	04-26-2011 10:51 PM
Swift Springs	Justin1686	North East Region	10	02-24-2011 06:58 PM