Stripped caliper bleed hole

g96818 · 07-29-2019, 05:24 PM

I think bleeder screws are about 10 ft-lbs. Don't quote me, should always check the manual

Rusty · 07-29-2019, 06:26 PM

Quote:

Originally Posted by g96818

I think bleeder screws are about 10 ft-lbs. Don't quote me, should always check the manual

7.9 N-m, 0.81 Kg-m, 70 in lbs or 5.8 ft lbs.

dts3 · 07-29-2019, 09:02 PM

I ended up ordering these:
Bleeder screw hole repair

Doorman's own website says they'll work with 10mm bleed screws, and the amazon listing says the outer sleeve is 1/4 NPT, which is larger than the 7/16 I bored out too. Hopefully this will work. I'll take pics and report back.

07-29-2019, 05:24 PM	#16 (permalink)
g96818 Track Member Join Date: May 2009 Location: A rock in a big pond Posts: 681 Drives: 2009 370Z, 2012 M56 Rep Power: 3393	I think bleeder screws are about 10 ft-lbs. Don't quote me, should always check the manual __________________ CZP are lying thieves!

07-29-2019, 09:02 PM	#18 (permalink)
dts3 Track Member Join Date: May 2018 Location: Farmington Hills, MI Posts: 599 Drives: 08 Expedition Rep Power: 6764	I ended up ordering these: Bleeder screw hole repair Doorman's own website says they'll work with 10mm bleed screws, and the amazon listing says the outer sleeve is 1/4 NPT, which is larger than the 7/16 I bored out too. Hopefully this will work. I'll take pics and report back. Rusty likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stripped Hex Screw	OptionZero	Exterior & Interior	12	05-13-2019 07:55 PM
FL caliper won't bleed	-ZS-Carpenter	Brakes & Suspension	12	11-07-2017 05:50 AM
Cannot bleed rear caliper... help?	osbornsm	Brakes & Suspension	15	10-11-2017 05:14 PM
Stripped Differential Nut	greasebeast	Engine & Drivetrain	3	07-26-2016 12:04 AM
!! Stripped Cat Bolt !!	omg35s	Intake/Exhaust	85	08-19-2015 02:33 PM