Nissan 370Z Forum  

Power Stop track day pads

I do like these pads especially at their price point. Not the best in all out performance, but they cannot be beat for the price. Strong initial bite, easy to

Go Back   Nissan 370Z Forum > Nissan 370Z Tech Area > Brakes & Suspension


Like Tree1Likes
  • 1 Post By Z is 4 ZEBRA!

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 10-09-2023, 11:33 AM   #7 (permalink)
Base Member
 
Join Date: Jun 2013
Location: SLC
Posts: 77
Drives: 40th Nissan 370z
Rep Power: 4253
Z is 4 ZEBRA! has a reputation beyond reputeZ is 4 ZEBRA! has a reputation beyond reputeZ is 4 ZEBRA! has a reputation beyond reputeZ is 4 ZEBRA! has a reputation beyond reputeZ is 4 ZEBRA! has a reputation beyond reputeZ is 4 ZEBRA! has a reputation beyond reputeZ is 4 ZEBRA! has a reputation beyond reputeZ is 4 ZEBRA! has a reputation beyond reputeZ is 4 ZEBRA! has a reputation beyond reputeZ is 4 ZEBRA! has a reputation beyond reputeZ is 4 ZEBRA! has a reputation beyond repute
Default

I do like these pads especially at their price point. Not the best in all out performance, but they cannot be beat for the price.

Strong initial bite, easy to modulate. They do fade about 10 minutes into the session, but they tend to plateau at that point and are consistent and predictable. I have done a 60 minute session on these pads. Once they get to that level, they remain consistently at that level for the remainder of the session.

They last me about 6 hours of track time when they have about 5mm of pad material left. They start at around 11mm. I could easily get to about 8 hours of time on these pads, but at the price point it's not a big deal. I go through two sets of front pads to a set of rear pads.

I tried to run Track Day Spec on fronts with Track Day rears to mitigate ice mode, but the rears wore down to the backing place in about an hour. I have since switched to running Track Day Spec both front and rear and have been happy with that combination. No ICE mode yet. I have previous triggered ICE mode when running the XP10/XP8 combination. Apparently they claim platform specific compounds so it is possible they have a different compound for the rear.

Overall I highly recommend them if you are looking for consistency on a budget.
KapitalZ likes this.
Z is 4 ZEBRA! is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
STOP and take a look at our Brake selection, Street to Track we have your back. MAMotorsports Suspension/Brakes 41 05-23-2016 11:04 AM
Power Stop K112 Front Ceramic Brake Pad and Cross Drilled/Slotted Combo Rotor One-Cli suzook Brakes & Suspension 0 04-12-2016 07:39 AM
MLT has coilovers, swaybars, pads, rotors, and everything you need to stop and turn! Motion Lab Suspension/Brakes 498 02-08-2016 02:34 PM
Which pads for the track? import111 Brakes & Suspension 13 10-06-2009 02:08 PM


All times are GMT -5. The time now is 02:19 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2