Cut OE Springs

Tractionless · 03-25-2019, 04:42 PM

Quote:

Originally Posted by JARblue

If you had a legit reason or idea behind cutting your springs, then post it.

How about every aftermarket spring I've seen opinions of are stiffer than OE and they tend to lower the car more than I'd like?

Quote:

Originally Posted by Rusty

I don't recommend cutting the springs. It's a lot of trial and error. cut, install, take back apart, cut again. Repeat. Once you find the height you want. The ride goes to chit because the springs are too stiff. And if you cut too much. You got to buy new springs. It's not as easy as some make you believe if you want to do it right. Working with a smaller diameter spring as on the Z is not as easy as working a larger diameter spring.

I understand the trial and error and is why I asked if it had been done.

On my latter vehicle and based on others findings there was a set amount from the end of the top coil that one would cut for the prescribed drop. I bought that car with aftermarket springs and the front ride was hellacious. I returned cut OE springs to the front the make it enjoyable again. Never hurt a thing including OE nor aftermarket shocks, struts, mounts etc. Many owners of that car cut OE until they get to the straight line power level and traction that requires a stiffer setup.

Thanks for the input, I didn't realize the diameter came into play!

Rusty · 03-25-2019, 05:00 PM

Quote:

Originally Posted by Tractionless

How about every aftermarket spring I've seen opinions of are stiffer than OE and they tend to lower the car more than I'd like?

I understand the trial and error and is why I asked if it had been done.

On my latter vehicle and based on others findings there was a set amount from the end of the top coil that one would cut for the prescribed drop. I bought that car with aftermarket springs and the front ride was hellacious. I returned cut OE springs to the front the make it enjoyable again. Never hurt a thing including OE nor aftermarket shocks, struts, mounts etc. Many owners of that car cut OE until they get to the straight line power level and traction that requires a stiffer setup.

Thanks for the input, I didn't realize the diameter came into play!

The other thing about the front springs on the Z. The ends are flattened. You can't cut the spring without flattening the ends for it to work. And you don't have the equipment to flatten the ends.

You can get the springs in almost any spring rate you want to begin with.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] Need swift sport springs/NISMO springs for trade+$	its6speed	Parts for sale (Private Classifieds)	1	07-20-2018 05:38 PM
[FOR SALE] Swift springs, 2016 nismo shocks and springs	EzDz	Parts for sale (Private Classifieds)	8	01-14-2016 02:08 PM
Swift Springs Spec-R Sport Springs for the 370z	corner3garage	Suspension/Brakes	206	02-19-2015 06:24 PM
Swifts sport springs vs swift spec r springs.	JAYNO20	Brakes & Suspension	4	03-01-2013 11:04 AM
[FOR SALE] Nismo shocks w. springs and Eibach springs	WWJD	Parts for sale (Private Classifieds)	19	03-20-2012 08:33 AM