|
Check the bushings on top of the shock. Jack the rear up using jack stands. Then put the jack under the spring bucket on the control arm. Jack that up
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
12-22-2018, 02:22 PM
|
#7 (permalink) |
|
A True Z Fanatic
Join Date: Dec 2011
Location: Fayettenam,Pennsyltucky
Age: 70
Posts: 35,579
Drives: 2011 Nismo GM 6M
Rep Power: 2684440   |
Check the bushings on top of the shock.
Jack the rear up using jack stands. Then put the jack under the spring bucket on the control arm. Jack that up to take pressure off of the shock. If the top bushing is bad. You should feel movement when you move the shock with your hand.
__________________
 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html Last edited by Rusty; 12-22-2018 at 02:28 PM. |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Clicking sound coming from rear driver side brake caliper | RAMOS | Brakes & Suspension | 13 | 05-23-2015 06:28 AM |
| Help!! Loud clicking sound while shifting coming from rear axle area | ssmoked | Nissan 370Z General Discussions | 12 | 11-03-2013 11:43 PM |
| help (Knocking sound on left rear) | Skullmike21 | Brakes & Suspension | 2 | 08-22-2013 10:17 PM |
| Knocking sound when corning | YamahaR6 | Nissan 370Z General Discussions | 16 | 07-12-2013 07:24 PM |
| 1st , 2nd and 3rd gear knocking sound? | danny8787 | Engine & Drivetrain | 2 | 03-29-2012 10:39 AM |
4Likes
Threaded Mode
