07-29-2018, 11:01 PM
|
#10 (permalink)
|
|
A True Z Fanatic
Join Date: Aug 2012
Location: NW, AZ
Posts: 9,330
Drives: 10 Nissan 370z Nismo
Rep Power: 2684385
|
Quote:
Originally Posted by Patrickz34
How much of the perks would I get out of just having front konis and leaving the rear oem for now? Ill have front and rear spc camber arms with them.
|
I would suggest you do both at the same time because the Swift spring are not as tall as OEM springs. The drop is about an inch so that will be a pretty big stagger back to front. I run about a .5" lower in the front than back but I run a square setup. You probably not going to feel to much in ride quality as most of the feel comes from the rear of the car and that may not be to your liking once you upgrade the front. Camber arms are good as you will be able to get your camber dialed in.
__________________
Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:|Fast Intentions 3" TT-TDX|SpecialtyZ/Fast Intentions 72 Row Oil Cooler|SZ 6 Puck Clutch & Flywheel|3GsCustoms|Z1|Wavetrac|Hotchkis|Whiteline |Blitz|Fortune Auto 500|Fujimura|SPL|H&R|TK|TWM|RPM Rollbar|Sparco|Next Level Performance|TrackSpec|AeroFlow Dynamics|Pioneer|
|
|
|
7Likes
Similar Threads
Threaded Mode
