Transfer my Koni/Swift setup to Nismo?

UNKNOWN_370 · 06-28-2017, 04:56 PM

I lowered my Z sport with the above when I first got it along with the rear camber. As I'm planning out my Nismo project. I was wondering if I should replace the Nismo shock with my koni shock? Will their still be an improvement with the Koni's over the nismo? Or should I part out my Koni's and only use the swift spec R springs?

Thanks in advance for your input?

Ape Factory · 06-28-2017, 11:34 PM

The Koni's have a shorter shaft than OEM correct? Aren't they designed to work with lowering springs? The Swifts might keep the OEM shocks out of their optimal range and they'll wear out more quickly.

Lastly, how many miles on the Konis? If they're high mileage, might be good to get them rebuilt first.

Rusty · 06-28-2017, 11:41 PM

What is the mileage on your Koni's? If you got some mileage on them. Either rebuild or replace. The new Nismo's have softer valving and springs I believe. I would drive the Nismo for awhile to see how you like the ride before pulling the trigger to quick on changing stuff out.

UNKNOWN_370 · 06-29-2017, 03:20 PM

Quote:

Originally Posted by Rusty

What is the mileage on your Koni's? If you got some mileage on them. Either rebuild or replace. The new Nismo's have softer valving and springs I believe. I would drive the Nismo for awhile to see how you like the ride before pulling the trigger to quick on changing stuff out.

I gotta lower the car a little for sure. My Koni swift combo definitely improved handling and made the car a little smoother on road. I'm just wondering what nismo owners think about where my brain is going with using the same suspension setup in my sport.

Rusty · 06-29-2017, 06:15 PM

Quote:

Originally Posted by UNKNOWN_370

I gotta lower the car a little for sure. My Koni swift combo definitely improved handling and made the car a little smoother on road. I'm just wondering what nismo owners think about where my brain is going with using the same suspension setup in my sport.

The Koni/Swift combo is a good set-up. I wouldn't worry about it.

Spooler · 07-07-2017, 12:52 AM

Quote:

Originally Posted by UNKNOWN_370

I gotta lower the car a little for sure. My Koni swift combo definitely improved handling and made the car a little smoother on road. I'm just wondering what nismo owners think about where my brain is going with using the same suspension setup in my sport.

You will probably like it better than the stock Nismo setup. Stock leaves something to be desired on bumpy roads. Aka, missing a kidney.

Rusty · 07-07-2017, 06:03 PM

Quote:

Originally Posted by Spooler

You will probably like it better than the stock Nismo setup. Stock is something to be desired on bumpy roads. Aka, missing a kidney.

Fixed it!

If you have a heavy chested woman in a tube top in the passenger seat. You don't know what you are missing.

UNKNOWN_370 · 06-29-2017, 03:17 PM

Quote:

Originally Posted by Ape Factory

The Koni's have a shorter shaft than OEM correct? Aren't they designed to work with lowering springs? The Swifts might keep the OEM shocks out of their optimal range and they'll wear out more quickly.

Lastly, how many miles on the Konis? If they're high mileage, might be good to get them rebuilt first.

I have about 25,000 miles on the Koni. I thought the Nismo shocks were half an inch shorter so I wasn't sure?

Juan@Fontana · 07-06-2017, 01:29 PM

If i remember correctly don't Koni Yellows have life time warranty? IE you can send them in for rebuilds whenever you want?

MaysEffect · 07-06-2017, 06:04 PM

Quote:

Originally Posted by UNKNOWN_370

I have about 25,000 miles on the Koni. I thought the Nismo shocks were half an inch shorter so I wasn't sure?

Both shocks for the Nismo and base have the same design and internals. The springs and bumpstops are what differentiates the two.

Not sure changing your Koni's with that amount of mileage is necessary, but sense you are taking them off/took them off your previous car, if you could get Koni to exchange them for free, sounds like a good deal. Putting them on the new car sounds like a logical upgrade.

Rusty · 07-06-2017, 09:57 PM

Quote:

Originally Posted by MaysEffect

Both shocks for the Nismo and base have the same design and internals. The springs and bumpstops are what differentiates the two.

Not sure changing your Koni's with that amount of mileage is necessary, but since you are taking them off/took them off your previous car, if you could get Koni to exchange them for free, sounds like a good deal. Putting them on the new car sounds like a logical upgrade.

Thought Nissan changed the valving and spring rate starting in 2015?

MaysEffect · 07-06-2017, 10:19 PM

Quote:

Originally Posted by Rusty

Thought Nissan changed the valving and spring rate starting in 2015?

It's possible. The versions i measured with JIC was the 2013 base and the 2011 Nismo.

Both internals are the same. I haven't measured post 2015 versions. In either case i highly doubt the valving has been changed. I've driven both the 2016 and 2014 Nismo models and the suspension feel is indiscernible to me at normal road speeds. Apart from the seats being the noticeable difference.

Rusty · 07-06-2017, 10:31 PM

Quote:

Originally Posted by MaysEffect

It's possible. The versions i measured with JIC was the 2013 base and the 2011 Nismo.

Both internals are the same. I haven't measured post 2015 versions. In either case i highly doubt the valving has been changed. I've driven both the 2016 and 2014 Nismo models and the suspension feel is indiscernible to me and normal road speeds. Apart from the seats being the noticeable difference.

How did you measure the shocks? With a shock dyno?

MaysEffect · 07-06-2017, 11:50 PM

Quote:

Originally Posted by Rusty

How did you measure the shocks? With a shock dyno?

Yes, among several other measurements. I may put in another effort to find a set 15-17 Nismo and base variants to test. I wouldn't be surprised if those aren't that different either though, the weight of the vehicle is well within 100Ibs of the 09-14 models.

cv129 · 07-07-2017, 08:26 PM

I like the direction of this thread haha

06-28-2017, 04:56 PM	#1 (permalink)
UNKNOWN_370 A True Z Fanatic Join Date: Jul 2009 Location: ny'r livn in tx Posts: 8,687 Drives: well over 130m.p.h. Rep Power: 14858	Transfer my Koni/Swift setup to Nismo? I lowered my Z sport with the above when I first got it along with the rear camber. As I'm planning out my Nismo project. I was wondering if I should replace the Nismo shock with my koni shock? Will their still be an improvement with the Koni's over the nismo? Or should I part out my Koni's and only use the swift spec R springs? Thanks in advance for your input? __________________ Favorite Quote. "I'm not gonna kill you... I'm just gonna Bash Your Face In" Jack Nicholson-"The Shining". 1980

06-28-2017, 11:34 PM	#2 (permalink)
Ape Factory Base Member Join Date: Apr 2016 Location: San Antonio Posts: 210 Drives: Audi RS5/QX70S Rep Power: 9	The Koni's have a shorter shaft than OEM correct? Aren't they designed to work with lowering springs? The Swifts might keep the OEM shocks out of their optimal range and they'll wear out more quickly. Lastly, how many miles on the Konis? If they're high mileage, might be good to get them rebuilt first. __________________ '13 Audi RS5 Misano w/mods-The Red Mist '13 G37 IPL-SOLD

06-28-2017, 11:41 PM	#3 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,167 Drives: 2011 Nismo GM 6M Rep Power: 2684437	What is the mileage on your Koni's? If you got some mileage on them. Either rebuild or replace. The new Nismo's have softer valving and springs I believe. I would drive the Nismo for awhile to see how you like the ride before pulling the trigger to quick on changing stuff out. UNKNOWN_370 likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

07-06-2017, 01:29 PM	#9 (permalink)
Juan@Fontana Enthusiast Member Join Date: Nov 2013 Location: Fontana Posts: 315 Drives: Z32 Rep Power: 21	If i remember correctly don't Koni Yellows have life time warranty? IE you can send them in for rebuilds whenever you want? __________________ Juan Vargas jvargas@fontananissan.com Motorsports Manager, Tech Support & EMS Specialist. https://www.nissanraceshop.com/wp-co...ite-Header.png

07-07-2017, 08:26 PM	#15 (permalink)
cv129 A True Z Fanatic Join Date: Jul 2011 Location: Dallas, TX Posts: 3,222 Drives: 09 Nismo, 16 Nismo Rep Power: 163995	I like the direction of this thread haha Rusty likes this. __________________ Setrab \| RE-71 \| SPL \| JRZ \| Nismo \| ARK \| Whiteline \| RacingBrake \| CJM Oil Pan \| Ti shield

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
KONI + SWIFT Amazing Combo!	Joe@ZSpeed	Suspension/Brakes	18	10-12-2016 08:43 PM
Koni Yellow Sport AutoX setup	cruzthepug	Track / Autocross / Drifting / Dragstrip	8	06-04-2015 08:26 PM
Koni Yellow Sport AutoX setup	cruzthepug	Track / Autocross / Drifting / Dragstrip	32	03-10-2015 02:03 PM
[FOR SALE] Swift Springs + Koni Yellows with 18k Miles	eshuang	Parts for sale (Private Classifieds)	7	01-31-2014 07:21 AM
Swift/koni yellow combo	pamante108	Suspension/Brakes	0	07-16-2013 11:36 AM