Extreme bump steer??

rambo

I have the OEM Bridgestone Potenzas on the car. Decent wear. Seems the front left tire has more wear on the outer edge of the tire.
If I remember correctly I think the outside tread was measuring at 3-4/32nds and the remaining tread about 6-7/32nds.
Toe out of spec?

Hotrodz

With that kind of uneven ware I would get two new front tires and an alignment.

Sent from my SM-N910P using Tapatalk

__________________
Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:|Fast Intentions 3" TT-TDX|SpecialtyZ/Fast Intentions 72 Row Oil Cooler|SZ 6 Puck Clutch & Flywheel|3GsCustoms|Z1|Wavetrac|Hotchkis|Whiteline |Blitz|Fortune Auto 500|Fujimura|SPL|H&R|TK|TWM|RPM Rollbar|Sparco|Next Level Performance|TrackSpec|AeroFlow Dynamics|Pioneer|

NoHyperbole

I too thought I had outside tire wear, but upon closer inspection, it's actually the inside that has worn more. The tread near the channel closest to the outer edge of the tire will appear more worn than the tread surrounding the three inner channels; on each of my tires, mine is almost completely worn down in this area, but I have a bit of tread remaining above the wear bars in the three inner channels. This outermost channel does not have a wear bar and should not be used to gauge tread depth.

If you are able to see the very inner edge of your tires, then you may see excessive wear in that area. I didn't realize this until I had the wheels off the car and looked closely at the tires.