Stiff/hard brakes before start in the mornings. Please help...

Chuck33079 · 07-22-2016, 08:51 AM

Quote:

Originally Posted by Trips

Sounds like the brake booster issue.

Maybe the vacuum line to the booster is loose/cracked?

Jhill · 07-22-2016, 01:59 PM

Does it go back to normal as soon as the vehicle is started? If so you are looking at the brake booster check valve. The booster is supposed to maintain vacuum for about 3-4 pedal depresses after engine off. If it can't hold this then first place to look is the check valve in line with the vacuum hose.

To comment if possible leaking hose, this would cause a vacuum leak, poor idle and lean mixture code so that's not likely.

Also if it does go back to normal as soon as engine starts and is running then you are ok to drive, your not losing your brakes it's just loosing assist after its sat. So as long as your engine doesn't die you'll still have assist while driving. Not the safest scenario but not and OMG I need to tow it to the shop scenario either.

Chan Chee Hoe · 07-23-2016, 12:07 AM

Quote:

Originally Posted by Chuck33079

Maybe the vacuum line to the booster is loose/cracked?

It is the one way valve in the vacuum line,cannot hold the vacuum once the engine stopped,not a big deal,my car is like that for a few years...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hard Left Hard Right Turning Air Bubble?	JrumMusic	Wheels & Tires	9	12-03-2014 10:25 AM
P0300 cold mornings?	1slow370	Engine & Drivetrain	16	11-21-2013 01:59 PM
Sunday Mornings Captree / Oak Beach Meet & Cruise	Econ	North East Region	37	08-19-2011 11:40 AM
Stiff transmission	mikes4397	Engine & Drivetrain	6	07-01-2010 06:47 PM
Nismo's stiff suspension	bucketman	Nissan 370Z General Discussions	7	07-24-2009 10:48 PM

07-22-2016, 01:59 PM	#2 (permalink)
Jhill Track Member Join Date: Mar 2016 Location: San jose Posts: 855 Drives: 2013 370z sport Rep Power: 3386	Does it go back to normal as soon as the vehicle is started? If so you are looking at the brake booster check valve. The booster is supposed to maintain vacuum for about 3-4 pedal depresses after engine off. If it can't hold this then first place to look is the check valve in line with the vacuum hose. To comment if possible leaking hose, this would cause a vacuum leak, poor idle and lean mixture code so that's not likely. Also if it does go back to normal as soon as engine starts and is running then you are ok to drive, your not losing your brakes it's just loosing assist after its sat. So as long as your engine doesn't die you'll still have assist while driving. Not the safest scenario but not and OMG I need to tow it to the shop scenario either.