Z1 Master cylinder brace installed.

tims370z · 02-15-2019, 10:36 PM

Quote:

Originally Posted by eastwest2300

So I installed mine a couple months ago, and just recently, I installed Mr. Rusty's brace ^^ too.. I got 2 of the 3 bolts in.. and it was a lot easier to install the 2nd time around..

Let me give you guys a trick that really worked for me.. I took 2 zip ties and with one I made a circle.. the 2nd zip tie, I zip tied (not anywhere tight, I could easily fit 3 fingers) the bar that separates the master cylinder area from the engine bay, now take that 1st zip tie and interloop it to the 2nd. (like 2 wedding bands interlooped)

if you did this right, you should have 1 zip tie to the small metal bar, and another zip tie interlooped and hanging freely...now you'll take that zip tie thats hanging and use that with the gold nut (its actual threads) from the master cylinder to place down in the mounting location, and those zip ties will hold that nut into place while you can focus on lining up your holes..

I then used a socket with a allen head with really good lighting to get the upper and lower bolts into the holes.

This was such a good tip with the zip ties. Thank you! Still having trouble with getting the bolts in due to not having the right tools. I got the top one in. I’m going to assume that the easiest. Has anyone tried these bendable extensions? I’m going to give them a whirl. My hands hurt after an hour and half of torture.

ABN Flexible Socket Extension Cable Flex Bar Ratchet Light Impact Tools 4-Piece Set of 1/4” Inch Drive & 3/8” Inch Drive https://www.amazon.com/dp/B074ZNS1ZC..._kh5zCbET2HJX0

Sent from my iPhone using Tapatalk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Prototype Aftermarket Clutch Master Cylinder - INSTALLED!	Alstann	Engine & Drivetrain	41	04-21-2016 11:30 PM
Bad Master Cylinder?	ARrado15	Engine & Drivetrain	6	04-17-2016 04:30 AM
Master cylinder	Elmo370z	Engine & Drivetrain	4	01-05-2015 01:21 PM
I think my master slave cylinder or maybe CSC just went	dmhenderson	Mid-Atlantic Region	89	04-11-2013 09:22 PM
Clutch master cylinder went out again	Zenmaster	Engine & Drivetrain	4	03-26-2013 12:54 AM