06-14-2015, 11:58 PM
|
#25 (permalink)
|
|
A True Z Fanatic
Join Date: May 2013
Location: The370Z.com
Posts: 4,956
Drives: 370Z
Rep Power: 5454
|
Quote:
Originally Posted by Zipper 104
Left rear of car.......
Left TN....Toe bolts go on the inboard end of the spring bucket where I've put the piece of beige masking tape.
Middle TN.... Lockout goes on the inboard end of the camber arm marked by a piece of green masking tape. See blue jam nut midway and adjuster beyond it.
Right TN.....entire Camber arm (outboard end closest) Inboard end furthest away with green tape. 104
|
Thank you Zip!!
Edit: You only used two lockout bolts? I see the lockout kit usually comes with four bolts/eight square washers, but your pictures only show two bolts installed on the end of each camber arm.
__________________
|
|
|
Similar Threads
30Likes
Threaded Mode
