Rear-end wanders at speed Help please

jchammond · 05-27-2015, 03:00 AM

~Z~ still handling well,,,but wanted to ck. the front-
0* toe....not what specs call for,,,again i broke out the tape measurer & ck'd...same width on front & rear of Front tires....toe is 0,,,not - as was in the rear.
i see that specs vary,pending on spec sheet....0.02min 0.05max on one alignment sheet(in degrees) 0.05min 0.12 on another spec sheet (dealership) 0.05min 0.11max on (alldata spec) so definitely calls for positive toe on front.
loosened up adjusters & adjusted tie rod ends 1/6th turn outwards on both sides...now i'm showing about 1/8" front to rear....after test drive...Great! felt as if caster increased-as steering snugged a bit & feels even better at high speed straight line runs.
??? why can't these alignment guys know how to do it properly on a ~Z~ ???

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Top Speed Exhaust + Top speed Y-Pipe + ERZ/CNT HFC	ODEHBOY	Parts for sale (Private Classifieds)	1	02-09-2015 11:20 PM
[FOR SALE] Exotic Speed Rear muffler with tips	ANMVQ	Parts for sale (Private Classifieds)	10	03-28-2014 12:25 PM
engine speed / gears / road speed	cossie1600	Engine & Drivetrain	6	09-19-2011 03:36 PM
6 Speed Manual or 7 Speed Automatic?	ichris14	Nissan 370Z General Discussions	19	01-04-2011 05:07 AM
Pic Request: Top Speed Exhaust... on car... rear shot	atx370z	Intake/Exhaust	2	11-18-2010 10:53 PM

05-27-2015, 03:00 AM	#21 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 59 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684396	~Z~ still handling well,,,but wanted to ck. the front- 0* toe....not what specs call for,,,again i broke out the tape measurer & ck'd...same width on front & rear of Front tires....toe is 0,,,not - as was in the rear. i see that specs vary,pending on spec sheet....0.02min 0.05max on one alignment sheet(in degrees) 0.05min 0.12 on another spec sheet (dealership) 0.05min 0.11max on (alldata spec) so definitely calls for positive toe on front. loosened up adjusters & adjusted tie rod ends 1/6th turn outwards on both sides...now i'm showing about 1/8" front to rear....after test drive...Great! felt as if caster increased-as steering snugged a bit & feels even better at high speed straight line runs. ??? why can't these alignment guys know how to do it properly on a ~Z~ ???