Readjusted the ride height on the left side to even things up. I still need 1/2" on the right rear. I disconnected the link on the left rear but once
|
|
LinkBack | Thread Tools | Display Modes |
|
01-25-2015, 09:06 PM | #1 (permalink) |
Enthusiast Member
Join Date: May 2014
Location: Houston, TX, USA
Posts: 280
Drives: 2014 370z Nismo
Rep Power: 10 |
Readjusted the ride height on the left side to even things up. I still need 1/2" on the right rear. I disconnected the link on the left rear but once on the ground I couldn't even see the link much less attach or adjust.
I have to figure out a way to access the link once the car is on the ground and the suspension is settled out. Last resort is to measure from ground to the center of the hub, remove the wheel and jack the suspension under the spring to the same height, then attach and adjust the link. I'll need some way to place a safety stand or some type of support in case it were to fall of the jack. I prefer not to be crushed.
__________________
2014 370Z NISMO -- HKS Hi-Power Exhaust -- Swift Springs -- BC ER Coilovers -- SPL Suspension Components -- Nismo R-Tune Intake -- Seibon BD CF Hood |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Lowered, now need to adjust headlights. | Kandy OrangeZ | Exterior & Interior | 23 | 11-09-2022 02:44 AM |
How to adjust your clutch pedal Correctly. | Joe@ZSpeed | DIY Section (Do-It-Yourself) | 9 | 04-24-2018 07:15 PM |
can only adjust to 2.5 with spc camber kit!! | RyanWest | Brakes & Suspension | 25 | 06-03-2013 08:54 AM |
Can't Adjust Idle RPM and Timing in Cipher? | AlphaSnacks | Tuning | 4 | 03-19-2012 12:47 PM |
how to adjust ams short shifter?? | Dan Z Man | Engine & Drivetrain | 6 | 11-22-2010 09:59 PM |