'14 h/u install

Jsmith7861 · 07-25-2014, 05:06 PM

So I read that you need a different harness for 13 and 14 models, is that true? Just bought my harness from another forum user, and antenna adapter, and now I'm doubting if I got the right one.

Jsmith7861 · 07-26-2014, 09:14 AM

Does no one know?

Nillaz · 07-26-2014, 04:26 PM

Those are the Metra harnesses for the Z (70-7552 and 40-NI22). I remember Big posting a while back that the wiring had changed at some point through 2013, but I don't know if Metra ever released an updated harness.

If that is the case it's not the end of the world, though you might have a little bit of work ahead of you. I don't believe the harness itself has changed, just the pin locations. With a little bit of patience you can use a small screwdriver or the like to relocate the pins to the proper locations.

Nillaz · 07-26-2014, 04:28 PM

Found the original thread here:

Caution with 2013 models and install

Before doing any DIY hacking on your harness I would visually inspect and verify the pinouts on the car side of the harness.

Jsmith7861 · 07-26-2014, 06:12 PM

Just finished my install, didn't move anything and everything seems to be working just fine, but I'll have to verify now lol. I just now saw your posts.

07-25-2014, 05:06 PM	#1 (permalink)
Jsmith7861 Enthusiast Member Join Date: Nov 2013 Location: Virginia Posts: 466 Drives: 2014 370z Base Sport Rep Power: 11	'14 h/u install So I read that you need a different harness for 13 and 14 models, is that true? Just bought my harness from another forum user, and antenna adapter, and now I'm doubting if I got the right one.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HFC install	g96818	Hawaii	30	08-11-2013 10:39 AM
PLS Help! 4.08 FD Install?	JC671	Engine & Drivetrain	6	09-21-2012 08:55 PM
Sub install	pokeyl	Audio & Video	23	04-11-2012 05:57 PM
CBE install first, then HFC, or together?	TruKoi	Intake/Exhaust	2	06-15-2011 10:49 PM
my install so far	samb03	Audio & Video	2	03-28-2011 03:44 PM

07-26-2014, 09:14 AM	#2 (permalink)
Jsmith7861 Enthusiast Member Join Date: Nov 2013 Location: Virginia Posts: 466 Drives: 2014 370z Base Sport Rep Power: 11	Does no one know?

07-26-2014, 04:26 PM	#3 (permalink)
Nillaz Premium Member Join Date: Feb 2012 Location: Reading, PA Posts: 259 Drives: 2012 370Z M6 Sport Rep Power: 3369	Those are the Metra harnesses for the Z (70-7552 and 40-NI22). I remember Big posting a while back that the wiring had changed at some point through 2013, but I don't know if Metra ever released an updated harness. If that is the case it's not the end of the world, though you might have a little bit of work ahead of you. I don't believe the harness itself has changed, just the pin locations. With a little bit of patience you can use a small screwdriver or the like to relocate the pins to the proper locations.

07-26-2014, 04:28 PM	#4 (permalink)
Nillaz Premium Member Join Date: Feb 2012 Location: Reading, PA Posts: 259 Drives: 2012 370Z M6 Sport Rep Power: 3369	Found the original thread here: Caution with 2013 models and install Before doing any DIY hacking on your harness I would visually inspect and verify the pinouts on the car side of the harness.

07-26-2014, 06:12 PM	#5 (permalink)
Jsmith7861 Enthusiast Member Join Date: Nov 2013 Location: Virginia Posts: 466 Drives: 2014 370z Base Sport Rep Power: 11	Just finished my install, didn't move anything and everything seems to be working just fine, but I'll have to verify now lol. I just now saw your posts.