Car Speed Signal, Illumination, Reverse wires!?

J3adSeed · 09-10-2009, 10:58 PM

Yeah hooking up to the speed signal will NOT disable video if you have already overrode that. The speed sensor will allow dead reckoning when satellite signal is lost or is weak and improve gps accuracy.

Liquid_G · 09-11-2009, 04:50 PM

So if you happened to get the harness without the illumination pin in it.. Couldn't you just make a jumper to the wire thats in pin #9 on the factory harness? I dont see why that wouldnt work.

bigaudiofanat · 09-11-2009, 04:59 PM

Quote:

Originally Posted by J3adSeed

Yeah hooking up to the speed signal will NOT disable video if you have already overrode that. The speed sensor will allow dead reckoning when satellite signal is lost or is weak and improve gps accuracy.

From the ones I have installed it will not let you watch vieo while in motion.

Also yes that could work if you wanted to do that. Just make sure that the pin is in the harness good so that way it will not come out and blow a fuse.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
For those wanting a reverse camera	Aus370z	Australia/New Zealand	30	09-08-2009 02:23 AM
Anyone in QLD had the reverse camera put in?	Aus370z	Australia/New Zealand	10	08-01-2009 07:53 PM
Where do door and dash speaker wires split on base system???	LattimerII	Audio & Video	6	07-20-2009 11:23 PM
Reverse Wire for Backup Cam	bpd138	Audio & Video	4	05-05-2009 06:56 PM
Tach signal on the z370's ICU	pulgoso33	Track / Autocross / Drifting / Dragstrip	0	04-15-2009 08:58 PM

09-10-2009, 10:58 PM	#1 (permalink)
J3adSeed Base Member Join Date: May 2009 Location: Orlando, FL Posts: 16 Drives: 09 370Z Sport MB M6 Rep Power: 18	Yeah hooking up to the speed signal will NOT disable video if you have already overrode that. The speed sensor will allow dead reckoning when satellite signal is lost or is weak and improve gps accuracy.

09-11-2009, 04:50 PM	#2 (permalink)
Liquid_G A True Z Fanatic Join Date: Aug 2009 Location: Chicago Burbs Posts: 1,439 Drives: 09 370z Supercharged Rep Power: 45	So if you happened to get the harness without the illumination pin in it.. Couldn't you just make a jumper to the wire thats in pin #9 on the factory harness? I dont see why that wouldnt work.