Plug & Play Speakers?

RonRizz

You can, very simply, replace just the door speakers. Leave the existing tweeters. Although running new speaker wires to the door speakers is advisable, it is by no means a necessity. Its been awhile since I changed mine out, but if I remember correctly, the tweeters are wired in parallel with the door speakers, and use only a capacitor to cut lower frequencies to them. Matt may be able to comment on whether or not I am correct when I say that.
Put in your new door speakers, listen to it with factory tweeters, If you decide it doesn't suit you, pop the grilles off, and unplug the tweeters. Problem solved.

__________________
P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals

bigaudiofanat

You are correct they are wired in parallel for the base system, which is another reason I recommend running new speaker wire. I know he can easily use the factory wire but not if he does components.

__________________
Need help with car audio or electronics? Let me know!! Need Help Let Me Know
Direct email address reimermatt@gmail.com
Owner of: Dynamic Mobile Audio Follow me below
https://www.facebook.com/Dynamicmobileaudio/

Bonzo

I'm really glad this is an option. I may or may not go this way, but it's good to know that it's an option. Now I just need to do some forum searching about installs and see how hard running wires would actually be.

Thanks ----- Bonzo

__________________
Finally Able To Order 2012 Model 8/24/2011
Delivered Tuesday November 15, 9:57 am!!!
2012, Auto, White, Sport, Kick Plates

RonRizz

__________________
P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals