Phone Control Switch Swap on Nismo

narkotic

Hi Guys - sorry to bump an old thread but there is a bit of a gap here for anyone else that wants to do this. I've been tasked with adding these buttons to a 2010 Nismo edition. I've found the part # for the buttons, it's : 25550-9N00B and if you do a google search, a plethora of vendors will show it for about $55.

What I'm curious about is how easy is it to swap in? The user CJeazy above makes it sound like it's a simple snap-in, but I know from experience (350z) to swap these buttons I had to remove the airbag with a torx wrench, remove the steering wheel, then swap out the buttons. Even then, the wiring wasn't in place.

Has anyone else done this with a bit more info? Are the wires there and run all the way to the trunk? My intent is to connect it to the Axxes system for an aftermarket unit to control phone calls.

Any information is much appreciated, or if you at least can find an existing topic, I've done countless searches.

SouthArk370Z

You should be able to find what you need in the Factory Service Manual. See link in my sig.

Edit: This is a great site but the search feature sucks (or maybe I just can't figure out how to use it effectively). I prefer going to Google and adding "site:the370z.com " to the front of my search string.

__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub
Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

narkotic

Thanks - that will help me research how to add the controls for sure.

It would be nice if someone that's actually done this could chime in to save me hours of reading - i.e. if the harness cable exists or not between the front the the rear of the car, etc.

Thanks again.