What do I need to add an Amp to Base model?

Sparhax · 06-20-2009, 08:59 PM

I have decided to keep the stock head unit and I have already bought and installed new Pioneer Speakers. Now I want to install a amp. What does the back of the base head unit look like? Do I need any special adapters to hook it into the amp? Is a 2-channel amp all I need?(I don't plan on putting rear speakers). Do I need a Audio Processor?

CBRich · 06-21-2009, 02:43 PM

Many amps today have speaker level inputs. This would mean you just cut the wires that go to the speakers and run them to the amp. Hook them up at the amp and run the amp output wires to your speakers. If the amp does not have speaker level inputs you would need one of these. to convert the speaker level to line level to plug in the amp's RCA input jacks.

Sparhax · 06-22-2009, 12:29 AM

Ok yeah, the Amp I am looking out does have Speaker level Inputs. Is a 2 channel amp enough if i don't plan to get rear speakers? Also I am curious about the audio processor or any kind of filters for the stock head unit.

bigaudiofanat · 06-23-2009, 08:46 AM

Than your going to need something like the JL clean sweep or the MTX Q. I would recommend upgrading the head unit it is a lot easier than keeping the factory head unit. SO you will need what I said above a power wire kit preferably 4 gauge wire that runs from your battery to your new amp, and than another wire from the ground of the chase to the amp and a set of rca cables. Also a small wore known as a wake up line this tells the amp to turn on when the car comes on. You will need a wiring diagram of the speaker colors and all so you can literally cut them behind the dash to tap into them for the speakers or you can run new wire which is a PITA in those cars I do believe. If you need more help just let me know.

06-20-2009, 08:59 PM	#1 (permalink)
Sparhax Base Member Join Date: Apr 2009 Location: Houston Age: 39 Posts: 32 Drives: 2017 370z Sport MT Rep Power: 16	What do I need to add an Amp to Base model? I have decided to keep the stock head unit and I have already bought and installed new Pioneer Speakers. Now I want to install a amp. What does the back of the base head unit look like? Do I need any special adapters to hook it into the amp? Is a 2-channel amp all I need?(I don't plan on putting rear speakers). Do I need a Audio Processor?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Base Model Stereo?	hey32g	Audio & Video	19	01-16-2010 06:18 PM
Nav unit in base model	DinoJ	Audio & Video	3	04-09-2009 11:14 AM
Navigation in Base Model ? . .	TN370ZLC	Nissan 370Z General Discussions	1	03-22-2009 12:29 PM
New Solid RED 6MT Base model!!	Dreamin'Z	New 370Z Owner	19	03-05-2009 10:23 PM
Base model interior?	Neo187H	Nissan 370Z General Discussions	15	01-21-2009 01:22 AM

06-21-2009, 02:43 PM	#2 (permalink)
CBRich A True Z Fanatic Join Date: Apr 2009 Location: SC Posts: 2,464 Drives: 370Z Rep Power: 544	Many amps today have speaker level inputs. This would mean you just cut the wires that go to the speakers and run them to the amp. Hook them up at the amp and run the amp output wires to your speakers. If the amp does not have speaker level inputs you would need one of these. to convert the speaker level to line level to plug in the amp's RCA input jacks.

06-22-2009, 12:29 AM	#3 (permalink)
Sparhax Base Member Join Date: Apr 2009 Location: Houston Age: 39 Posts: 32 Drives: 2017 370z Sport MT Rep Power: 16	Ok yeah, the Amp I am looking out does have Speaker level Inputs. Is a 2 channel amp enough if i don't plan to get rear speakers? Also I am curious about the audio processor or any kind of filters for the stock head unit.

06-23-2009, 08:46 AM	#4 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 852	Than your going to need something like the JL clean sweep or the MTX Q. I would recommend upgrading the head unit it is a lot easier than keeping the factory head unit. SO you will need what I said above a power wire kit preferably 4 gauge wire that runs from your battery to your new amp, and than another wire from the ground of the chase to the amp and a set of rca cables. Also a small wore known as a wake up line this tells the amp to turn on when the car comes on. You will need a wiring diagram of the speaker colors and all so you can literally cut them behind the dash to tap into them for the speakers or you can run new wire which is a PITA in those cars I do believe. If you need more help just let me know.