DIY: Kenwood DNX6140 installed in my 370Z with Sirius and back up Cam (AK370Z)

Attaboy · 06-18-2009, 06:43 PM

AK, did you disable the parking break signal to enable DVD playback while driving?
if so, did you cut the wire, or use an altetnative method?

AK370Z · 06-19-2009, 12:12 PM

Quote:

Originally Posted by vman

Yeah, I am looking to get a back up camera, DVD player, Navi, bluetooth, USB and iphone compatibility I really do not care for the Sirius radio though. I hope the other Kenwoods have the same options........only one problem.......first I need the car, unfortunately I cannot find a base PG AT with SPKG anywhere.....might have to wait til 2010. Might settle on black or Brilliant Silver but not to sure....

Again, that is a pimp set up. Congrats and thanks for the info!

You're welcome! Please let us know when you're ready to buy the Z. We will help you find the best deal on the Car and financing!

Quote:

Originally Posted by ConchZ2

AK………..How fast is the Kenwood’s start up time? Is the backup camera instantly on after starting your car?
Do you have any plans for the base speakers?

If you watch the video I, you can see the start up time. I think it's 10-12 seconds. You have to keep in mind that this HU is packed with a lot of features. When you turn the HU on, it checks for SIRIUS, bluetooth compatible phone, GPS for the NAV and any other attachment(s){i.e. ipod, usb etc}. Therefore, it's NOT the fastest thing when we mention start up time but very reasonable. I usually start the car, put the seat belts on and by the time I'm ready to drive, it's on!

Quote:

Originally Posted by zman1910

Beautifully done AK. Out of curiosity are you using the base speakers. If so, how do they sound compared to the old headunit? Better or no change?

Zman, thank you for your question. You can find your answer in video II. Yes, it sound 10 times better. Sound is crisp and I can turn it up a lot more than before without distorting. Although, I am planning on replacing them with a good quality Component speaker set.

Quote:

Originally Posted by Attaboy

AK, did you disable the parking break signal to enable DVD playback while driving?
if so, did you cut the wire, or use an altetnative method?

Before I answer you question, I must make a statement. I do not watch dvd in my car. The ONLY time dvds will be played in my Z when I have a passenger and we are on a long roadtrip. It's for the passenger entertainment only. With that said, yes, it's bypassed. Watch 1:11-1:15s 2nd video.

To answer the 2nd part of the question, please check your pm

.

I was messing around with the settings and found out that I CAN actually change the HU color theme to match my Z interior color!!! You can see how I did it in the Video Part II

Here are some after pictures

Check out Video no II

Video Part II
YouTube - Kenwood DNX6140 installed in 370Z Sirius Backup cam Part II

(please click on HQ to view in Hi Res)

I had NO dvd here (I am not a dvd kinda guy. I watch all my movies in theater and via renting) in my possession. I simply grabbed "Chapelle's Show" just to give you an idea how the HU plays dvd. I must apologize

.

ConchZ2 · 06-19-2009, 01:06 PM

Thanks AK………..it sounds like your Kenwood is a little faster than my Pioneer F700BT.
I didn’t need the DVD and paid around $400. for the HU, HD radio, harnesses etc.
I’m looking forward to hear what you do for speakers.

AK370Z · 06-23-2009, 12:04 AM

Well, big thanks to bpd138 for looking into my small problem (R cam not automatically switching when reverse in engaged). He suggested that I should look at some A/V setting before taking things apart. One of the setting was "R-Cam interruption". From the factory, "R-Cam interruption" is turned off. I simple switch it to on and voila, it works like a charm. Now, if I put the gear in reverse, the rear cam activates. I can still press and hold navi button to turn on rear cam manually.

YouTube - 370z backup camera

My installer Matt did a really good job. Everything is working 100% now!

dcrew1x · 07-23-2009, 03:22 PM

Hey AK,

I've got most of the stuff I need for a similar audio setup as yours:

The wiring harness, antenna adapter, Ipod adapter, PAC switch are coming in the mail.

I plan on getting this installed very soon and now I have to bug you with a few questions:

I can't really tell from your pictures, but did you have to remove the license plate lights to install or make room for your rear-view camera?

I also noticed that your camera is closer to the left side of your license plate. Did you have to drill any holes to the body or inner plastic molding to make room as well? Some of the other members who have installed a rear-view camera have it installed on the right side so I'm wondering if it was due to fitment issues?

Example 1: *videos* kenwood dnx6140 installed with pioneer rear view cam

Example 2: The Kenwood 7140, I wanted it!

I have the same Camera as you

and was also wondering how you have it mounted: adhesive or bolted down etc

Aside from the camera questions lol, did you have to reset anything after the install was complete? IE: auto up/down windows, Syncro Rev Match, Maintenance interval settings, VDC traction control, etc?

I noticed your update to this thread for the passenger air bag reset. I'll keep that in mind so that it is re-connected before I turn anything on. Preferably before I even re-connect the battery.

:

I don't know if you have the IPOD adapter (it looks as if you do since its highlighted as a source option on one of your pics) but I was wondering where you have the cable for it routed? I plan on having it in the center arm rest near the 12V outlet like the touring models and the USB cable on the center console cabinet.

I think that's about it; can't think of any more questions at the moment

AK370Z · 07-23-2009, 10:34 PM

Quote:

Originally Posted by dcrew1x

Hey AK,

I've got most of the stuff I need for a similar audio setup as yours:

The wiring harness, antenna adapter, Ipod adapter, PAC switch are coming in the mail.

I plan on getting this installed very soon and now I have to bug you with a few questions:

I can't really tell from your pictures, but did you have to remove the license plate lights to install or make room for your rear-view camera?
YES. Left license plate light cover was removed. Basically what bigaudiofanat said.

I also noticed that your camera is closer to the left side of your license plate. Did you have to drill any holes to the body or inner plastic molding to make room as well? Some of the other members who have installed a rear-view camera have it installed on the right side so I'm wondering if it was due to fitment issues?
You can mount on either side. I would suggest to get a double sided or sticky tape and try out which position makes you happier. Drive around and feel for the perfect placement. You can mount it on Left, right and right by the hatch button. try them all out first before making your final decision.

Example 1: *videos* kenwood dnx6140 installed with pioneer rear view cam

Example 2: The Kenwood 7140, I wanted it!

I have the same Camera as you

and was also wondering how you have it mounted: adhesive or bolted down etc
2 small screws . I can take picture for you if you want.

Aside from the camera questions lol, did you have to reset anything after the install was complete? IE: auto up/down windows, Syncro Rev Match, Maintenance interval settings, VDC traction control, etc?
Yes. The windows have to be reset. Instructions:

Quote:

If the windows do not close automatically
If the power window automatic function (closing
only) does not operate properly, perform the
following procedure to initialize the power
window system.

1. Push the ignition switch to the ON position.

2. Close the door.

3. Open the window completely by operating
the power window switch.

4. Pull the power window switch and hold it to
close the window, and then hold the switch
more than 3 seconds after the window is
closed completely.

5. Release the power window switch. Operate
the window by the automatic function to
confirm the initialization is complete.

6. Perform steps 2 through 5 above for other
windows.

Also, please note, your synchroRev match gets turned off EVERYTIME you unattach the neg battery cable. Turn on SRM before driving away or else you'll feel the "clutch" on your first downshift

I noticed your update to this thread for the passenger air bag reset. I'll keep that in mind so that it is re-connected before I turn anything on. Preferably before I even re-connect the battery.

:

I don't know if you have the IPOD adapter (it looks as if you do since its highlighted as a source option on one of your pics) but I was wondering where you have the cable for it routed? I plan on having it in the center arm rest near the 12V outlet like the touring models and the USB cable on the center console cabinet.
I have no ipod adapter but thinking about getting it. I do regret a little about drilling a hole in the cubby hole. If I were to do this again, I would simply put the USB link in the glove box since it doesn't require constant plugging and unplugging. This way there NO drilling required. If I have to sell my car and I plan on keeping my HU, I have to buy a new cubby hole for the new buyer.

I think that's about it; can't think of any more questions at the moment

Awesome! Can't wait to see it installed!

Nismo221 · 09-24-2010, 01:59 AM

nice that you can change the colors on the HU. Looks great!

Pjac · 07-25-2011, 02:51 PM

AK, I recently brought a Pioneer 4300 double, 7" Tuner/DVD radio system. Do I need to order the after market kit so that unit will fit?

bigaudiofanat · 07-25-2011, 04:27 PM

Quote:

Originally Posted by Pjac

AK, I recently brought a Pioneer 4300 double, 7" Tuner/DVD radio system. Do I need to order the after market kit so that unit will fit?

Pioneer and alpine YES kenwood units some say yes some say no.

sequoia2006 · 09-10-2011, 05:26 AM

I was wondering if anyone here has run into the problem with the intelligent key after replacing the HU and install the backup cam? After I did the installation, the car can only recognize the key if it's close to the center console. I don't remember messing with the inside key antenna.

06-23-2009, 12:04 AM	#4 (permalink)
AK370Z Administrator Join Date: Sep 2008 Location: NJ Posts: 9,930 Drives: 09 370Z MB Sports M6 Rep Power: 10	Update: rear cam automatically activates with reverse gear engagement Well, big thanks to bpd138 for looking into my small problem (R cam not automatically switching when reverse in engaged). He suggested that I should look at some A/V setting before taking things apart. One of the setting was "R-Cam interruption". From the factory, "R-Cam interruption" is turned off. I simple switch it to on and voila, it works like a charm. Now, if I put the gear in reverse, the rear cam activates. I can still press and hold navi button to turn on rear cam manually. YouTube - 370z backup camera My installer Matt did a really good job. Everything is working 100% now! __________________ The370Z Signature Pictures ll Want to rock our forum decals on your car? Then click here! ll How to Embed YouTube Videos In a Post STOP! (Hammertime) ll Become a Premium Member Click HERE ll F.A.Q. Are You a Nissan Dealer? Click Here to Become A "Supporting Dealer" and Start Listing Your 370Zs In Our Inventory Section My Monterey Blue Z ll My Exhaust --> My Intake --> G3 Nissan's Official Response Regarding Oil Temp Issue: CLICK HERE Need a Set of Cheap Winter wheels /Tires? Then Visit The Banner Link Below and Place Your Order. You'll Help Keep The370Z Alive.

07-23-2009, 03:22 PM	#5 (permalink)
dcrew1x Track Member Join Date: Jun 2009 Location: SoCal Posts: 821 Drives: Graphite Bullet Rep Power: 370	Hey AK, I've got most of the stuff I need for a similar audio setup as yours: The wiring harness, antenna adapter, Ipod adapter, PAC switch are coming in the mail. I plan on getting this installed very soon and now I have to bug you with a few questions: I can't really tell from your pictures, but did you have to remove the license plate lights to install or make room for your rear-view camera? I also noticed that your camera is closer to the left side of your license plate. Did you have to drill any holes to the body or inner plastic molding to make room as well? Some of the other members who have installed a rear-view camera have it installed on the right side so I'm wondering if it was due to fitment issues? Example 1: videos kenwood dnx6140 installed with pioneer rear view cam Example 2: The Kenwood 7140, I wanted it! I have the same Camera as you and was also wondering how you have it mounted: adhesive or bolted down etc Aside from the camera questions lol, did you have to reset anything after the install was complete? IE: auto up/down windows, Syncro Rev Match, Maintenance interval settings, VDC traction control, etc? I noticed your update to this thread for the passenger air bag reset. I'll keep that in mind so that it is re-connected before I turn anything on. Preferably before I even re-connect the battery.: I don't know if you have the IPOD adapter (it looks as if you do since its highlighted as a source option on one of your pics) but I was wondering where you have the cable for it routed? I plan on having it in the center arm rest near the 12V outlet like the touring models and the USB cable on the center console cabinet. I think that's about it; can't think of any more questions at the moment

09-24-2010, 01:59 AM	#7 (permalink)
Nismo221 Enthusiast Member Join Date: Sep 2010 Location: Decatur, Alabama Age: 37 Posts: 489 Drives: 2010 370z Nismo Rep Power: 15	nice that you can change the colors on the HU. Looks great! __________________ Stillen Gen 3, Motordyne M370 Intake Manifold, 25 row oil cooler, Z1 test pipes, Greddy Ti-C 70mm dual exhaust, 15mm front/20mm rear spacers, RE-11's, V1 detector, LED interior lights, LED tag lights, Password JDM CF engine and radiator cooling covers.

07-25-2011, 02:51 PM	#8 (permalink)
Pjac Base Member Join Date: Jul 2011 Location: nyc Posts: 5 Drives: 09 Nissan 370Z PW M6 Rep Power: 15	Radio Kit AK, I recently brought a Pioneer 4300 double, 7" Tuner/DVD radio system. Do I need to order the after market kit so that unit will fit?

09-10-2011, 05:26 AM	#10 (permalink)
sequoia2006 Base Member Join Date: Sep 2011 Location: Tumwater Posts: 1 Drives: United States Rep Power: 14	Intelligent key problem after audio installation I was wondering if anyone here has run into the problem with the intelligent key after replacing the HU and install the backup cam? After I did the installation, the car can only recognize the key if it's close to the center console. I don't remember messing with the inside key antenna.

06-18-2009, 06:43 PM	#1 (permalink)
Attaboy Base Member Join Date: Apr 2009 Location: Olathe, KS Posts: 130 Drives: '09 370Z 6M Black Rep Power: 17	AK, did you disable the parking break signal to enable DVD playback while driving? if so, did you cut the wire, or use an altetnative method?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fujimura cf Rear diffuser installed! (with pics)( AK370Z)	AK370Z	Exterior & Interior	73	04-24-2016 04:47 PM
Kenwood dnx6140 Navigation issue	Liquid_G	Audio & Video	18	06-11-2010 12:56 AM
Got Kenwood DNX6140 Installed	dcrew1x	Audio & Video	7	08-29-2009 07:54 PM
videos kenwood dnx6140 installed with pioneer rear view cam	dainedazz	Audio & Video	14	08-16-2009 04:40 PM
door chime for kenwood dnx6140	wowdusk	DIY Section (Do-It-Yourself)	1	08-03-2009 01:04 AM