![]() |
You are going to need a bracket because the stock ones are 6.5 You should not run polk MM's off a stock head unit as they are actually 3 ohms
|
|||||||
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
|
#1 (permalink) |
|
Car Audio Installer
![]() |
You are going to need a bracket because the stock ones are 6.5
You should not run polk MM's off a stock head unit as they are actually 3 ohms instead of the standard 4 ohms. If you are going to run them off a aftermarket head unit this is ok. If you have the component set install the new tweeters in the factory ones place. If you have a pair of coaxial than you should disconnect the factory tweeter otherwise it will sound horrible. But component systems are recommended. Also make sure to run new speaker wire if you have a set of components.
__________________
Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/ |
|
|
|
![]() |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Aftermarket speakers that fit on the door w/o drilling | bradcc | Audio & Video | 25 | 05-27-2014 12:33 PM |
| Question about door speakers | rtran704 | Audio & Video | 5 | 10-19-2011 07:07 AM |
| Installing new door speakers | HellfighterZ | Audio & Video | 1 | 05-01-2010 06:06 PM |
| Door Speakers Bose w/o Nav Pics | jikhead | Audio & Video | 6 | 07-21-2009 08:48 AM |
| Best choice - Replacement door speakers Base system | 355890 | Audio & Video | 5 | 03-16-2009 12:53 AM |