Back up camera

jayl · 05-05-2011, 05:49 PM

got it with the help of ken.

jayl · 05-06-2011, 12:40 AM

so I have 3 wires total from this camera...

blk goes to ground.. I extended the red with another 22AWG wire and its connected to contant power...and one rca will connect to the rca port on the NAV.

I am trying to understand how does the nav know when to switch the input to the camera?

Svre46 · 05-06-2011, 09:27 AM

Quote:

Originally Posted by jayl

so I have 3 wires total from this camera...

blk goes to ground.. I extended the red with another 22AWG wire and its connected to contant power...and one rca will connect to the rca port on the NAV.

I am trying to understand how does the nav know when to switch the input to the camera?

Jay1

You want to connect the camera to your positive reverse light wire so that it is ONLY on when you are in reverse. You will then parallel + or - trigger to your radio. It should have a wire for reverse input. Mine is a pioneer and they let you do either a positive or negative trigger. I set it to positive and just paralleled another wire from my reverse lights where the camera's positive lead connected on the tail light harness.

jayl · 05-06-2011, 10:57 AM

well I wanted the ability to power on the camera even when the car is not in reverse hence connecting to a constant source.. just not sure how it will detect reverse gear..

Svre46 · 05-06-2011, 11:31 AM

Quote:

Originally Posted by jayl

well I wanted the ability to power on the camera even when the car is not in reverse hence connecting to a constant source.. just not sure how it will detect reverse gear..

Ok I understand. I just think it would make it "burn out" faster by being constantly on. Take a wire and tap it into the reverse lights then (positive) and run a lead up to the radio with that RCA you have for video. You should have a reverse trigger wire on the back of the head unit. Connect the lead you ran to the wire off the head unit.

takjak2 · 05-06-2011, 09:15 PM

Quote:

Originally Posted by Svre46

I just think it would make it "burn out" faster by being constantly on.

I tried to tackle this misconception in another thread. It turns out that some manufacturers recommend against installing in an always-on configuration in their instructions. However, there is no technical reason for the sensors to fail electrically over time, and while there is still no evidence of one actually burning out there are numerous people reporting long lifespans.

I think the best comparison is to CCTV security cameras that will run fine 24/7/365 for years.

jayl · 05-08-2011, 10:03 AM

Got the camera installed (always on option) very good for $20 the picture was grainy at night but I do not see are issues with it knowing I paid 20 for it!!

I am thinking of installing a switch in place of the 3 dummy switches... that will kill the constant power and the reverse sensor so I can control always on / off option..

Horsie · 05-11-2011, 04:11 AM

So.. some questions.

1. is this camera working with HDD navigation unit?
2. Where is the video IN connector?
3. It switches on automatically in reverse (also on the LCD), or do I have to press manually AUX?
4. There are any install instructions for this?

Bruche · 05-11-2011, 06:21 AM

YouTube has some videos - even a couple to do a bypass so you can use the camera while not in reverse. They come so that they will auto on the camera when you put in reverse and turn off the camera when taken out of reverse.

My Z has the camera view in the rearview mirror. It is smaller than on a nav but works well.

Good luck.

Kingbaby · 05-11-2011, 06:26 AM

I've had the CMOS/CCD backup cam for quite sometime now...works like a charm. I advise however getting LED reverse lights to help brighten the area for view by the camera

Quote:

Originally Posted by jayl

well I wanted the ability to power on the camera even when the car is not in reverse hence connecting to a constant source.. just not sure how it will detect reverse gear..

This is how I have mines setup. It doesn't turn on when in reverse I have to turn it on. I only use it to verify how much space I have left. So I park as normal but not all the way then turn it on to complete backing up.

Great for unfamiliar park jobs!

Quote:

Originally Posted by Svre46

Ok I understand. I just think it would make it "burn out" faster by being constantly on. Take a wire and tap it into the reverse lights then (positive) and run a lead up to the radio with that RCA you have for video. You should have a reverse trigger wire on the back of the head unit. Connect the lead you ran to the wire off the head unit.

Everones speculates about it burning out and it may very well burn out quicker being on all the time. It's not a factory piec so it's your money being spent to purschase a new one. I say don't do it, and follow whats quoted!

jayl · 05-11-2011, 10:21 AM

Quote:

Originally Posted by Horsie

So.. some questions.

1. is this camera working with HDD navigation unit? I dont see why not.
2. Where is the video IN connector? Yous should have an RCA in the back, I take it your nav is aftermarket... it should have come with extra RCA cables for doing this.
3. It switches on automatically in reverse (also on the LCD), or do I have to press manually AUX? yes your nav should have a trigger wire that you need to connect to the backup light...
4. There are any install instructions for this? Yes, if you search..

install is very easy... 3 wires from the camera 1. RCA back of the HU, 2. Blk wire ground it. 3. Red power wire, either connect to the reverse light or to switched power depending on what setup you want.

Horsie · 05-11-2011, 12:29 PM

So, when I put the camera in reverse, I'll have immediately on the LCD the backup camera, or do I have to hit the AUX button?

There is any pictures that shows there to connect exactly in the back of the HU unit?

I found a lot of them on Ebay, can you recommend one?
Also, LED lights for license plate...

P.S. Camera to be PAL or NTSC.?
Some vendors are selling different versions.

jayl · 05-11-2011, 02:35 PM

I got the same as mentioned on this thread:
Color CMOS/CCD Car Rear View Camera for Nissan Livina - Tmart.com
very good IMO picture is grainy if the lighting is dark but i dont mind it at all...

what type of HU do you have? this will determine where it will connect...

Horsie · 05-12-2011, 05:14 AM

I have the 2010 Roadster - HDD navigation unit.
This one:

I've ordered the camera from tmart.

jayl · 05-12-2011, 11:50 AM

then you want to use a device like NAV tools, search for a DIY done by Zyanora I think is the name of the user.

05-11-2011, 04:11 AM	#38 (permalink)
Horsie Base Member Join Date: Aug 2010 Location: Romania Posts: 47 Drives: Nissan 370z Rep Power: 14	So.. some questions. 1. is this camera working with HDD navigation unit? 2. Where is the video IN connector? 3. It switches on automatically in reverse (also on the LCD), or do I have to press manually AUX? 4. There are any install instructions for this? __________________ Nissan 370z Roadster (black) aKa Batmobil...

05-11-2011, 06:21 AM	#39 (permalink)
Bruche Base Member Join Date: May 2011 Location: Leesburg, Virginia Posts: 22 Drives: 2011 NISMO #357 6MT Rep Power: 13	YouTube has some videos - even a couple to do a bypass so you can use the camera while not in reverse. They come so that they will auto on the camera when you put in reverse and turn off the camera when taken out of reverse. My Z has the camera view in the rearview mirror. It is smaller than on a nav but works well. Good luck. __________________ 2011 NISMO #357 Magnetic Black - APIC Z130BT - Clear Bra

05-11-2011, 12:29 PM	#42 (permalink)
Horsie Base Member Join Date: Aug 2010 Location: Romania Posts: 47 Drives: Nissan 370z Rep Power: 14	So, when I put the camera in reverse, I'll have immediately on the LCD the backup camera, or do I have to hit the AUX button? There is any pictures that shows there to connect exactly in the back of the HU unit? I found a lot of them on Ebay, can you recommend one? Also, LED lights for license plate... P.S. Camera to be PAL or NTSC.? Some vendors are selling different versions. __________________ Nissan 370z Roadster (black) aKa Batmobil... Last edited by Horsie; 05-11-2011 at 12:57 PM.

05-11-2011, 02:35 PM	#43 (permalink)
jayl Track Member Join Date: Jun 2010 Location: md Posts: 813 Drives: 09 370z base MT Rep Power: 15	I got the same as mentioned on this thread: Color CMOS/CCD Car Rear View Camera for Nissan Livina - Tmart.com very good IMO picture is grainy if the lighting is dark but i dont mind it at all... what type of HU do you have? this will determine where it will connect... __________________ -Jay

05-12-2011, 05:14 AM	#44 (permalink)
Horsie Base Member Join Date: Aug 2010 Location: Romania Posts: 47 Drives: Nissan 370z Rep Power: 14	I have the 2010 Roadster - HDD navigation unit. This one: I've ordered the camera from tmart. __________________ Nissan 370z Roadster (black) aKa Batmobil... Last edited by Horsie; 05-12-2011 at 05:22 AM.

05-05-2011, 05:49 PM	#31 (permalink)
jayl Track Member Join Date: Jun 2010 Location: md Posts: 813 Drives: 09 370z base MT Rep Power: 15	got it with the help of ken.

05-06-2011, 12:40 AM	#32 (permalink)
jayl Track Member Join Date: Jun 2010 Location: md Posts: 813 Drives: 09 370z base MT Rep Power: 15	so I have 3 wires total from this camera... blk goes to ground.. I extended the red with another 22AWG wire and its connected to contant power...and one rca will connect to the rca port on the NAV. I am trying to understand how does the nav know when to switch the input to the camera?

05-06-2011, 10:57 AM	#34 (permalink)
jayl Track Member Join Date: Jun 2010 Location: md Posts: 813 Drives: 09 370z base MT Rep Power: 15	well I wanted the ability to power on the camera even when the car is not in reverse hence connecting to a constant source.. just not sure how it will detect reverse gear..

05-08-2011, 10:03 AM	#37 (permalink)
jayl Track Member Join Date: Jun 2010 Location: md Posts: 813 Drives: 09 370z base MT Rep Power: 15	Got the camera installed (always on option) very good for $20 the picture was grainy at night but I do not see are issues with it knowing I paid 20 for it!! I am thinking of installing a switch in place of the 3 dummy switches... that will kill the constant power and the reverse sensor so I can control always on / off option..

05-12-2011, 11:50 AM	#45 (permalink)
jayl Track Member Join Date: Jun 2010 Location: md Posts: 813 Drives: 09 370z base MT Rep Power: 15	then you want to use a device like NAV tools, search for a DIY done by Zyanora I think is the name of the user. __________________ -Jay

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Factory Back up camera	FuszNissan	Nissan 370Z General Discussions	165	09-16-2012 08:22 PM
Back up camera	rangercarol	Audio & Video	15	04-12-2011 02:51 AM
Back Up Camera in Va Beach	cnocmmz	Nissan 370Z Roadster (Convertible)	6	12-17-2010 10:29 AM
Which Back Up Camera / DNX 9960	Dubro	Audio & Video	2	12-10-2010 09:21 PM
Back up Camera? Added to factory GPS??	Corpse	Nissan 370Z General Discussions	5	07-26-2010 08:23 PM