Backup camera cmos300 trouble shooting

Austexan · 02-02-2012, 09:25 AM

[QUOTE=TreeSemdyZee;876935]Awesome.If you want to be able to turn the camera on without being in reverse, you'll have to run the power wire to your auxiliary power. Mine is that way and I can push and hold my "AUD" button and the camera turns on without being in reverse.
By doing this, you can access the camera in any gear. Reverse will turn it on, but you can also trigger it with the "AUD" button.

So i installed a kenwood CMOS-200 and have a picture in reverse but nothing when i hold the button to view while driving. I have the reverse tapped into the reverse light and the power tapped into a red accessory power source...is this not correct?

memorylasts · 03-10-2012, 01:49 AM

Nvm

03-10-2012, 01:49 AM	#2 (permalink)
memorylasts A True Z Fanatic Join Date: Mar 2010 Location: San Diego Posts: 1,125 Drives: Cars... Rep Power: 18	Nvm __________________ somewhat-journal-thingy Last edited by memorylasts; 03-14-2012 at 08:06 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Backup Camera on 370Z	sbkim	Audio & Video	41	01-18-2023 07:29 PM
Backup Camera installed in Roadster	axeman71	Nissan 370Z Roadster (Convertible)	6	03-23-2018 08:04 PM
Backup Camera in 2010 with Nav	axeman71	Audio & Video	1	04-07-2013 02:09 PM
OEM Backup camera for stock NAV!	z370z	Canada	2	02-05-2010 08:07 AM
370Z Backup Camera from Infiniti	dwhitley0381	Nissan 370Z General Discussions	23	07-23-2009 04:49 AM

02-02-2012, 09:25 AM	#1 (permalink)
Austexan Base Member Join Date: Sep 2011 Location: Austin Tx Posts: 12 Drives: Blk '11 370Z M6 Sprt Rep Power: 14	[QUOTE=TreeSemdyZee;876935]Awesome.If you want to be able to turn the camera on without being in reverse, you'll have to run the power wire to your auxiliary power. Mine is that way and I can push and hold my "AUD" button and the camera turns on without being in reverse. By doing this, you can access the camera in any gear. Reverse will turn it on, but you can also trigger it with the "AUD" button. So i installed a kenwood CMOS-200 and have a picture in reverse but nothing when i hold the button to view while driving. I have the reverse tapped into the reverse light and the power tapped into a red accessory power source...is this not correct?