Stealth Bazooka install plus powdercoated rear brace bar

Mike · 11-26-2010, 05:19 PM

Finished up redoing my stereo system. I always loved my old Avic Z3, so I found one on ebay to replace the non user friendly F900BT I had. Also upgraded the door speakers from Infinity to Boston Acoustics and added a Bazooka BTA6250 6.5" 250W bass tube.

While I was at it, I also powdercoated the rear strut brace magnetic black.

The bazooka came out nice and stealthy.
I mounted it with the mounting bases that came with it, but instead of the cloth straps they provided, I used hose clamps, and then cut the styrofoam to fill the sides.

Strut brace:

Sub installed, and one side of the foam fitted. Note the cavity in front of the speaker grill. Bazooka says to leave 2-4" of free space

Foam fillers fully installed:

and all buttoned up!

[img]

m4a1mustang · 11-26-2010, 05:20 PM

Nice.

Xan · 11-26-2010, 06:47 PM

Nice! I didn't know we had so much space back there...

m4a1mustang · 11-26-2010, 07:07 PM

Quote:

Originally Posted by Xan

Nice! I didn't know we had so much space back there...

If you took the foam and spare tire out of the hatch you could keep two adult bodies back there.

Mike · 11-26-2010, 07:47 PM

Quote:

Originally Posted by m4a1mustang

If you took the foam and spare tire out of the hatch you could keep two adult bodies back there.

90 ST · 11-26-2010, 07:53 PM

looks good, nice and steathy.

Z1804 · 11-26-2010, 09:03 PM

That looks great Mike. You should powdercoat my strut brace for me....:-)

Mike · 11-26-2010, 10:31 PM

Quote:

Originally Posted by Z1804

That looks great Mike. You should powdercoat my strut brace for me....:-)

take it off the car! Its a lot of work to get it out though.

daisuke149 · 11-26-2010, 11:00 PM

nice mike!

i had thought about that brace bar for a bit but figured it would be a PITA to get out.

m4a1mustang · 11-26-2010, 11:00 PM

Quote:

Originally Posted by daisuke149

nice mike!

i had thought about that brace bar for a bit but figured it would be a PITA to get out.

I think the brace comes out pretty easily. You just need to remove some of the interior panels to access the bolts.

antennahead · 11-27-2010, 12:02 AM

Looks great, also doesn't stick up at all. I read where you thought it would be about a 1/2 inch high, but it looks flush

How does it sound? Do they get decent bottom out of a 6"? I realize this isn't "rap" territory, but for rock, blues, and jazz, decent bottom?

Mike · 11-27-2010, 08:18 AM

it sounds great, much more presence to the music. I thought it was going to stick up, but once I took everything apart, I found there was one M6 sized bolt sticking up about an inch from underneath the car, into that cavity, and I cut it off flush, so the thing fits perfectly now.

Mike · 11-27-2010, 08:19 AM

Quote:

Originally Posted by m4a1mustang

I think the brace comes out pretty easily. You just need to remove some of the interior panels to access the bolts.

You need to remove pretty much all of the interior panels except the quarter panel trim to get it out, then its just a matter of unbolting it.

If I had to do it again, I would move the 'Z' logo up a little. I centered it vertically between the two flat ribbed sides of the bar, but didn't realize the bar was actually slanted a little when installed, so its a little low, but still ok.

daisuke149 · 11-27-2010, 08:26 PM

hey mike, quick question..

in my car.. the flat side with the ridges is ont he sides and the smooth is top and bottom.. in your pictures it looks the opposite? did you turn it?

Mike · 11-28-2010, 09:45 AM

I don't think so, but I may have. If you look in the upper left corner of the 3rd picture, you can see the brace it goes under, and the flat part is under the flat part of the brace. I don't even know if it would be possible to turn it sideways the way its mounted, but maybe.

11-26-2010, 05:19 PM	#1 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2185	Stealth Bazooka install plus powdercoated rear brace bar Finished up redoing my stereo system. I always loved my old Avic Z3, so I found one on ebay to replace the non user friendly F900BT I had. Also upgraded the door speakers from Infinity to Boston Acoustics and added a Bazooka BTA6250 6.5" 250W bass tube. While I was at it, I also powdercoated the rear strut brace magnetic black. The bazooka came out nice and stealthy. I mounted it with the mounting bases that came with it, but instead of the cloth straps they provided, I used hose clamps, and then cut the styrofoam to fill the sides. Strut brace: Sub installed, and one side of the foam fitted. Note the cavity in front of the speaker grill. Bazooka says to leave 2-4" of free space Foam fillers fully installed: and all buttoned up! [img] ScottOmatic likes this. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

11-26-2010, 05:20 PM	#2 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6962	Nice. __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

11-26-2010, 06:47 PM	#3 (permalink)
Xan A True Z Fanatic Join Date: Jan 2010 Location: MA Posts:99999999999999 Posts: 3,301 Drives: 370Z 40th Aniversary Rep Power: 24	Nice! I didn't know we had so much space back there... __________________

11-26-2010, 09:03 PM	#7 (permalink)
Z1804 Premium Member Join Date: May 2010 Location: GA Posts: 784 Drives: 2009 370Z Sport M6 Rep Power: 15	That looks great Mike. You should powdercoat my strut brace for me....:-) __________________ Z1804 ------ Z1804 ------ Z1804 ------ ------ Z1804 ------ Z1804 ------ Z1804 Fairlady Z 2011 Calendar Now on Sale!!!

11-27-2010, 12:02 AM	#11 (permalink)
antennahead A True Z Fanatic Join Date: Mar 2009 Location: Charleston, SC Posts: 15,181 Drives: '07 Z4 "M" Roadster Rep Power: 57	Looks great, also doesn't stick up at all. I read where you thought it would be about a 1/2 inch high, but it looks flush How does it sound? Do they get decent bottom out of a 6"? I realize this isn't "rap" territory, but for rock, blues, and jazz, decent bottom? __________________ *Time is a companion, who goes with us on the journey, and reminds us to cherish every moment............ because it will never come again*

11-26-2010, 07:53 PM	#6 (permalink)
90 ST A True Z Fanatic Join Date: May 2010 Location: Calgary Posts: 1,861 Drives: 90 and 15 GMC Sierra Rep Power: 420	looks good, nice and steathy.

11-26-2010, 11:00 PM	#9 (permalink)
daisuke149 My *** is famous! Join Date: Mar 2010 Location: Alpharetta, GA Posts: 4,849 Drives: 2013 Boss 302 PW Rep Power: 31	nice mike! i had thought about that brace bar for a bit but figured it would be a PITA to get out.

11-27-2010, 08:18 AM	#12 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2185	it sounds great, much more presence to the music. I thought it was going to stick up, but once I took everything apart, I found there was one M6 sized bolt sticking up about an inch from underneath the car, into that cavity, and I cut it off flush, so the thing fits perfectly now. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

11-27-2010, 08:26 PM	#14 (permalink)
daisuke149 My *** is famous! Join Date: Mar 2010 Location: Alpharetta, GA Posts: 4,849 Drives: 2013 Boss 302 PW Rep Power: 31	hey mike, quick question.. in my car.. the flat side with the ridges is ont he sides and the smooth is top and bottom.. in your pictures it looks the opposite? did you turn it?

11-28-2010, 09:45 AM	#15 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2185	I don't think so, but I may have. If you look in the upper left corner of the 3rd picture, you can see the brace it goes under, and the flat part is under the flat part of the brace. I don't even know if it would be possible to turn it sideways the way its mounted, but maybe. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Install: Clarion VX400 and Amplified 8" Bazooka	Master_Ly	Audio & Video	23	09-19-2011 08:56 PM
What do you think??? Powdercoated Stillen G3 and Strut Brace	Z1804	Intake/Exhaust	46	07-27-2010 06:39 AM
GT Spec Rear Lower Tie Brace	Z1Performance	Suspension/Brakes	2	12-18-2009 05:33 PM