Difference Between Scosche and Metra Dash Kits?

G Fo12ce · 10-13-2010, 04:00 PM

I'm doing my head unit install soon (Pioneer AVIC-920BT). I thought I wasn't going to need a dash kit at all since I have a Nismo. After reading DeEePiDDy's install it looks like I'm going to want one after all to clean up the gaps.

I was wondering if there was any major difference in quality between these 2 kits? DeEe is using a Metra so I'm leaning that way.

Thanks.

vipor · 10-13-2010, 04:07 PM

I've always preferred Metra when I was installing. I think the only Scosche kit I've used is for the old Taurus with the bubble dash. Damn that thing was ugly.

What you should find is a trim ring for a Double DIN radio. Something like 1/4" of trim around the whole face of the radio. I'll do a little research..

Looks like the kit (Metra in this case) actually does a good job. Didn't read your whole question initially lol.

G Fo12ce · 10-13-2010, 04:12 PM

Quote:

Originally Posted by vipor

I've always preferred Metra when I was installing. I think the only Scosche kit I've used is for the old Taurus with the bubble dash. Damn that thing was ugly.

What you should find is a trim ring for a Double DIN radio. Something like 1/4" of trim around the whole face of the radio. I'll do a little research..

Thanks for the feedback homie

I think I'm going to check locally if I can buy a dash kit, I want to get it in over the weekend. Shipping it from Amazon ect probably isn't going to work out on that time frame.

kenchan · 10-13-2010, 04:22 PM

i thought the nismo has the base's bezel... if so, why not just get a doubledin and re-use your face plate?

G Fo12ce · 10-13-2010, 04:44 PM

Ken it's the same as the base HU. I know it will work with the stock "faceplate" but if you look at the guy's review I linked he said there are gaps when you use my/his Pioneer.

I remeber we discussed it briefly on another post. I remeber you or someone saying that you used that felt stuff and/or there is a Scosche double din trim piece used universally by some (but I think it's listed as a Civic trim). I think in the $20-30 though it might just be cleaner/easier to get the Metra kit right?

Unclemeaty · 10-13-2010, 04:44 PM

I just installed an AVH-p3200bt pioneer double din into my 2009 Base and did not need a dash kit. i think the Nismo is the same?? The install left 1/32 inch surrounding the radio which was adequate install. I did notice a very minute 'metalic' gap through this 1/32 inch gap but it was nothing a few wraps of black electrical tape could not mask.

Try it first; if you need the kit later on thats OK.

Shoot, I'm editing this post because I do remember one important thing. I had to use about 1/2 inches worth of washers on the HU metal shelf to pull it out of the dash and align with the factory bezel.

Still, it looks perfect and was less expensive than the kit.

bigaudiofanat · 10-13-2010, 05:15 PM

For it to look clean with no gaps get the kit you do need it unless you want gaps.

I believe both are the same pretty much.

Baer383 · 10-13-2010, 06:19 PM

I have the Metra around my Kenwood 7160 ( the adaptor looks like crap) the next day I ordered a base radio bezel and got a big discount b/c our company has a account with local Nissan dealer

G Fo12ce · 10-13-2010, 06:26 PM

Are you saying the texture doesn't match on the Metra? Looks cheap?

I haven't heard anyone say that here and there's some nit picky bastards here lol. I am kinda picky too, I'd like it to look close to stock.

Baer383 · 10-13-2010, 06:59 PM

Quote:

Originally Posted by G Fo12ce

Are you saying the texture doesn't match on the Metra? Looks cheap?

I haven't heard anyone say that here and there's some nit picky bastards here lol. I am kinda picky too, I'd like it to look close to stock.

Yes the texture doesn't look good it has a grainy look so I sanded it down and put some paint on it (we have trim paint) and it still didn't look right plus I haven't heard many people comment on the color of the Metra mine doesn't match at all,so why have a 40k sports car with a kick a** stereo and a dash that doesn't match and has a adaptor ring,plus you only need the bezel out of the kit.
The problem is Nissan wants $225-250 for the base/Nismo bezel so unless you can get a good deal on a Nissan one I would use the Metra now the keep a look out for a factory one,that's what I did.

kenchan · 10-13-2010, 07:31 PM

Quote:

Originally Posted by G Fo12ce

Ken it's the same as the base HU. I know it will work with the stock "faceplate" but if you look at the guy's review I linked he said there are gaps when you use my/his Pioneer.

I remeber we discussed it briefly on another post. I remeber you or someone saying that you used that felt stuff and/or there is a Scosche double din trim piece used universally by some (but I think it's listed as a Civic trim). I think in the $20-30 though it might just be cleaner/easier to get the Metra kit right?

Oh, ok yes, there was a gap I had to fill using EZ Felt.
I've not tried the Metra faceplate so not sure if there is no gap or not.

DeEePiDDy · 10-13-2010, 09:17 PM

Ok for those of you who keep saying you don't need the dash kit, I guess its a matter of preference BUT there clearly is a gap if you use the factory dash. Here are side by side shots of using the dash and not. First off there is a small but visible gap. Second, the Pioneer x920bt's face has a groove that goes around the edge that becomes VERY visible with the original dash. Using just a trim ring would not fit as the gap is too small for it. I have the Metra dash kit in mine and could not be happier. There is NO GAP AT ALL with it. As for the color, yes its a slightly darker shade of black than the original dash kit but when its installed I don't notice it. The steering wheel, seats, floor mats and dash are all slightly different shades of black so to be honest its really hard to notice. Its available from Crutchfield for $25 shipped and it came in 2 days!

Baer383 · 10-13-2010, 09:25 PM

Quote:

Originally Posted by DeEePiDDy

Ok for those of you who keep saying you don't need the dash kit, I guess its a matter of preference BUT there clearly is a gap if you use the factory dash. Here are side by side shots of using the dash and not. First off there is a small but visible gap. Second, the Pioneer x920bt's face has a groove that goes around the edge that becomes VERY visible with the original dash. Using just a trim ring would not fit as the gap is too small for it. I have the Metra dash kit in mine and could not be happier. There is NO GAP AT ALL with it. As for the color, yes its a slightly darker shade of black than the original dash kit but when its installed I don't notice it. The steering wheel, seats, floor mats and dash are all slightly different shades of black so to be honest its really hard to notice. Its available from Crutchfield for $25 shipped and it came in 2 days!

You are right but what I have found is for some reason the Pioneer 's have more of a fitment issue with the stock bezel than Kenwood,Alpine.
If you can dig up a pic of a Kenwood with a stock bezel it usually has a good fit and also the Metra,the only reason I got the stock bezel is I think it is ridiculous that the Metra has a .25 spacer around it.

DeEePiDDy · 10-13-2010, 09:29 PM

I cant comment on Kenwoods or Alpines as I dont have one, however I've seen pictures of Kenwoods all over this site with and without the dash kit. Personally I feel that it just looks "cleaner" with the dash kit, but again its user preference. That being said with the Pioneer x920bt, IMO the dash kit is VERY MUCH NEEDED...

bigaudiofanat · 10-13-2010, 10:29 PM

Correct on both the pioneers need it the alpines and kenwoods do not really need it as much. Which I prefer them anyway.

10-13-2010, 04:00 PM	#1 (permalink)
G Fo12ce Premium Member Join Date: Nov 2009 Location: Socal Posts: 996 Drives: Sold! Rep Power: 52	Difference Between Scosche and Metra Dash Kits? I'm doing my head unit install soon (Pioneer AVIC-920BT). I thought I wasn't going to need a dash kit at all since I have a Nismo. After reading DeEePiDDy's install it looks like I'm going to want one after all to clean up the gaps. I was wondering if there was any major difference in quality between these 2 kits? DeEe is using a Metra so I'm leaning that way. Thanks. __________________ Nismo Suspension: New Owners Check Here!

10-13-2010, 04:07 PM	#2 (permalink)
vipor A True Z Fanatic Join Date: Aug 2009 Location: Euless, TX [ DFW ] Age: 43 Posts: 13,531 Drives: Nismo 09-0183 QAB Rep Power: 50	I've always preferred Metra when I was installing. I think the only Scosche kit I've used is for the old Taurus with the bubble dash. Damn that thing was ugly. What you should find is a trim ring for a Double DIN radio. Something like 1/4" of trim around the whole face of the radio. I'll do a little research.. Looks like the kit (Metra in this case) actually does a good job. Didn't read your whole question initially lol. __________________ 2009 NISMO # 0193 \| QAB \| Albums! \| 05.04.10 (Dynojet) 291.94hp/248.28tq Oil Cooler (DIY) \| Custom Headlights \| GTSPEC Braces \| F.I. Long Tube Headers Last edited by vipor; 10-13-2010 at 04:11 PM.

10-13-2010, 04:44 PM	#5 (permalink)
G Fo12ce Premium Member Join Date: Nov 2009 Location: Socal Posts: 996 Drives: Sold! Rep Power: 52	Ken it's the same as the base HU. I know it will work with the stock "faceplate" but if you look at the guy's review I linked he said there are gaps when you use my/his Pioneer. I remeber we discussed it briefly on another post. I remeber you or someone saying that you used that felt stuff and/or there is a Scosche double din trim piece used universally by some (but I think it's listed as a Civic trim). I think in the $20-30 though it might just be cleaner/easier to get the Metra kit right? __________________ Nismo Suspension: New Owners Check Here!

10-13-2010, 04:44 PM	#6 (permalink)
Unclemeaty Base Member Join Date: Aug 2010 Location: Atlanta Posts: 203 Drives: 150cc Scooter Rep Power: 15	I just installed an AVH-p3200bt pioneer double din into my 2009 Base and did not need a dash kit. i think the Nismo is the same?? The install left 1/32 inch surrounding the radio which was adequate install. I did notice a very minute 'metalic' gap through this 1/32 inch gap but it was nothing a few wraps of black electrical tape could not mask. Try it first; if you need the kit later on thats OK. Shoot, I'm editing this post because I do remember one important thing. I had to use about 1/2 inches worth of washers on the HU metal shelf to pull it out of the dash and align with the factory bezel. Still, it looks perfect and was less expensive than the kit. Last edited by Unclemeaty; 10-13-2010 at 04:48 PM.

10-13-2010, 05:15 PM	#7 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 854	For it to look clean with no gaps get the kit you do need it unless you want gaps. I believe both are the same pretty much. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/ Last edited by bigaudiofanat; 10-13-2010 at 05:19 PM.

10-13-2010, 04:22 PM	#4 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	i thought the nismo has the base's bezel... if so, why not just get a doubledin and re-use your face plate?

10-13-2010, 06:19 PM	#8 (permalink)
Baer383 A True Z Fanatic Join Date: Aug 2010 Location: Lawrenceville,Ga Posts: 4,293 Drives: My foot up your azz Rep Power: 30	I have the Metra around my Kenwood 7160 ( the adaptor looks like crap) the next day I ordered a base radio bezel and got a big discount b/c our company has a account with local Nissan dealer

10-13-2010, 06:26 PM	#9 (permalink)
G Fo12ce Premium Member Join Date: Nov 2009 Location: Socal Posts: 996 Drives: Sold! Rep Power: 52	Are you saying the texture doesn't match on the Metra? Looks cheap? I haven't heard anyone say that here and there's some nit picky bastards here lol. I am kinda picky too, I'd like it to look close to stock. __________________ Nismo Suspension: New Owners Check Here! Last edited by G Fo12ce; 10-13-2010 at 06:33 PM.

10-13-2010, 09:29 PM	#14 (permalink)
DeEePiDDy Track Member Join Date: Jul 2010 Location: Horsham, PA Posts: 548 Drives: 09 Nissan 370z CY MT Rep Power: 17	I cant comment on Kenwoods or Alpines as I dont have one, however I've seen pictures of Kenwoods all over this site with and without the dash kit. Personally I feel that it just looks "cleaner" with the dash kit, but again its user preference. That being said with the Pioneer x920bt, IMO the dash kit is VERY MUCH NEEDED... __________________ 2009 Nissan 370Z Chicane Yellow Base Manual Transmission

10-13-2010, 10:29 PM	#15 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 854	Correct on both the pioneers need it the alpines and kenwoods do not really need it as much. Which I prefer them anyway. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Metra 99-7607B dash kit for Nissan 370Z is NOW AVAILABLE!	AK370Z	Audio & Video	44	06-22-2015 05:32 PM
TWM Knob, Scosche Harness, Sony Head Unit, and Metra Single DIN Dash Kit	tbonesteak	Parts for sale (Private Classifieds)	9	09-27-2010 11:40 PM
Metra dash kit	fuct	Parts for sale (Private Classifieds)	20	09-25-2010 12:10 AM
Urgent Metra dash kit help.	tbonesteak	Audio & Video	11	03-27-2010 03:53 PM
Metra 99-7607B dash kit and aftermarket headunit install instructions .pdf	AK370Z	Nissan 370Z Owners Manual / Service Manuals	4	08-01-2009 01:02 PM