Difference Between Scosche and Metra Dash Kits?

G Fo12ce · 10-14-2010, 09:41 AM

Quote:

Originally Posted by Baer383

Yes the texture doesn't look good it has a grainy look so I sanded it down and put some paint on it (we have trim paint) and it still didn't look right plus I haven't heard many people comment on the color of the Metra mine doesn't match at all,so why have a 40k sports car with a kick a** stereo and a dash that doesn't match and has a adaptor ring,plus you only need the bezel out of the kit.
The problem is Nissan wants $225-250 for the base/Nismo bezel so unless you can get a good deal on a Nissan one I would use the Metra now the keep a look out for a factory one,that's what I did.

Thanks for the discription. Also I already have the factory face as I have a Nismo.

Quote:

Originally Posted by kenchan

Oh, ok yes, there was a gap I had to fill using EZ Felt.
I've not tried the Metra faceplate so not sure if there is no gap or not.

Thanks Ken. After looking at the pics on post #12 I'm not sure there is enough space to do anything that will look right with the felt.

Quote:

Originally Posted by DeEePiDDy

Ok for those of you who keep saying you don't need the dash kit, I guess its a matter of preference BUT there clearly is a gap if you use the factory dash. Here are side by side shots of using the dash and not. First off there is a small but visible gap. Second, the Pioneer x920bt's face has a groove that goes around the edge that becomes VERY visible with the original dash. Using just a trim ring would not fit as the gap is too small for it. I have the Metra dash kit in mine and could not be happier. There is NO GAP AT ALL with it. As for the color, yes its a slightly darker shade of black than the original dash kit but when its installed I don't notice it. The steering wheel, seats, floor mats and dash are all slightly different shades of black so to be honest its really hard to notice. Its available from Crutchfield for $25 shipped and it came in 2 days!

Thanks for the pics DeEePiDDy, that really helps. I think for $25 I'm just going to get one. If for some reason I don't like it I'm sure I can resell it.

Quote:

Originally Posted by bigaudiofanat

Correct on both the pioneers need it the alpines and kenwoods do not really need it as much. Which I prefer them anyway.

I really like the features on the newer Kenwoods and I was considering one. However, when Amazon has the AVIC-X920BT for $899, then they have a 30% off promotion, a $100 mail in rebate and free shipping you just can't argue with the value. Anyway you slice it it's a really nice head unit for about $500.

kenchan · 10-14-2010, 11:22 AM

Quote:

Originally Posted by G Fo12ce

Thanks Ken. After looking at the pics on post #12 I'm not sure there is enough space to do anything that will look right with the felt.

i looked at post #12.

first off the thin factory gasket needs to be removed around the opening. that will clean up the look.

then the 1mm or so gap you see, you can fill it tighly with the felt.

the recess area around the sides and top... you might want to experiment if filling the recess area will look better or not.

if the HU's the one you want you'll figure out a way to make it look right.

DeEePiDDy · 10-14-2010, 04:04 PM

In terms of this particular HU is seems much easier to just spend a measly $25 and get the dash kit. The dash kit I got is black and not grainy at all. In fact its smoother than my factory dash kit.

G Fo12ce · 10-14-2010, 04:20 PM

I ordered the Metra off Crutchfield. $25.

Imperial · 10-17-2010, 03:37 AM

I have the Pioneer X920BT as well but with a little bit of custom work by my installer have no "gap" issue using the OEM faceplate. There is still a narrow valley between the receiver and the faceplate but I actually prefer that to the bezel that comes with metra kit that fills that area because it looks cleaner IMO. I'll post a pic soon to show you all what I'm talking about.

Imperial · 10-28-2010, 11:51 AM

No kit, no gap, super clean.

G Fo12ce · 10-28-2010, 12:59 PM

That looks really good. What did he do differently to clean the gap up? I should have mine in this weekend by the way.

DeEePiDDy · 10-28-2010, 02:26 PM

Looks good. What do you have going around the Headunit filling the gap?

Imperial · 10-29-2010, 12:04 AM

He custom fitted a plastic trim bezel that I think comes with the head unit.

DeEePiDDy · 10-29-2010, 05:35 AM

He had to get it else where... The head unit does nit come with a trim ring.

Imperial · 10-29-2010, 06:15 AM

Whatever he did... fit and finish is perfect and looks way better than the dash kit IMO which was on stand-by during my install BTW (just not a fan of the bigger opening and over-all finish of the kit). I guess it's just a matter of finding the right installer. =)

G Fo12ce · 10-29-2010, 09:40 AM

Scosche and Metra make a lot of double din trim peices like that. The problem for everyone is if you don't have access to them all to try different ones out you have to just get the dash kit.

Imperial if it's not too much trouble maybe you can ask your installer if he remembers which one it was. That way others with Pioneers and base/sport/Nismo cars can buy one instead of the Metra kit.

Thanks again for the pic

docaam · 10-29-2010, 11:54 AM

ok can you install the factory bezel ring of any kenwood in base face plate? as mine i had to pull the kenwood a bit out to install the ring, and if i get this metra can i install the kenwood with the bezel ring, point i want is the double din hole of metra looks bigger?

G Fo12ce · 10-29-2010, 12:34 PM

It seems like the Kenwood users have more of flush fit. The Metra is bigger, but they give you trim rings of a few sizes to make it flush in the kit.

docaam · 10-29-2010, 12:49 PM

so does anyone knows if i can install this with kenwood with the outer ring of the double din? or if metra has a ring for kenwood?

10-14-2010, 04:04 PM	#18 (permalink)
DeEePiDDy Track Member Join Date: Jul 2010 Location: Horsham, PA Posts: 548 Drives: 09 Nissan 370z CY MT Rep Power: 15	In terms of this particular HU is seems much easier to just spend a measly $25 and get the dash kit. The dash kit I got is black and not grainy at all. In fact its smoother than my factory dash kit. __________________ 2009 Nissan 370Z Chicane Yellow Base Manual Transmission

10-14-2010, 04:20 PM	#19 (permalink)
G Fo12ce Premium Member Join Date: Nov 2009 Location: Socal Posts: 996 Drives: Sold! Rep Power: 51	I ordered the Metra off Crutchfield. $25. __________________ Nismo Suspension: New Owners Check Here!

10-28-2010, 12:59 PM	#22 (permalink)
G Fo12ce Premium Member Join Date: Nov 2009 Location: Socal Posts: 996 Drives: Sold! Rep Power: 51	That looks really good. What did he do differently to clean the gap up? I should have mine in this weekend by the way. __________________ Nismo Suspension: New Owners Check Here!

10-28-2010, 02:26 PM	#23 (permalink)
DeEePiDDy Track Member Join Date: Jul 2010 Location: Horsham, PA Posts: 548 Drives: 09 Nissan 370z CY MT Rep Power: 15	Looks good. What do you have going around the Headunit filling the gap? __________________ 2009 Nissan 370Z Chicane Yellow Base Manual Transmission

10-29-2010, 05:35 AM	#25 (permalink)
DeEePiDDy Track Member Join Date: Jul 2010 Location: Horsham, PA Posts: 548 Drives: 09 Nissan 370z CY MT Rep Power: 15	He had to get it else where... The head unit does nit come with a trim ring. __________________ 2009 Nissan 370Z Chicane Yellow Base Manual Transmission

10-17-2010, 03:37 AM	#20 (permalink)
Imperial Enthusiast Member Join Date: Aug 2010 Location: Long Beach, CA Posts: 486 Drives: 10 Nismo 370Z PW M6 Rep Power: 14	I have the Pioneer X920BT as well but with a little bit of custom work by my installer have no "gap" issue using the OEM faceplate. There is still a narrow valley between the receiver and the faceplate but I actually prefer that to the bezel that comes with metra kit that fills that area because it looks cleaner IMO. I'll post a pic soon to show you all what I'm talking about.

10-29-2010, 12:04 AM	#24 (permalink)
Imperial Enthusiast Member Join Date: Aug 2010 Location: Long Beach, CA Posts: 486 Drives: 10 Nismo 370Z PW M6 Rep Power: 14	He custom fitted a plastic trim bezel that I think comes with the head unit.

10-29-2010, 06:15 AM	#26 (permalink)
Imperial Enthusiast Member Join Date: Aug 2010 Location: Long Beach, CA Posts: 486 Drives: 10 Nismo 370Z PW M6 Rep Power: 14	Whatever he did... fit and finish is perfect and looks way better than the dash kit IMO which was on stand-by during my install BTW (just not a fan of the bigger opening and over-all finish of the kit). I guess it's just a matter of finding the right installer. =)

10-29-2010, 09:40 AM	#27 (permalink)
G Fo12ce Premium Member Join Date: Nov 2009 Location: Socal Posts: 996 Drives: Sold! Rep Power: 51	Scosche and Metra make a lot of double din trim peices like that. The problem for everyone is if you don't have access to them all to try different ones out you have to just get the dash kit. Imperial if it's not too much trouble maybe you can ask your installer if he remembers which one it was. That way others with Pioneers and base/sport/Nismo cars can buy one instead of the Metra kit. Thanks again for the pic __________________ Nismo Suspension: New Owners Check Here!

10-29-2010, 11:54 AM	#28 (permalink)
docaam A True Z Fanatic Join Date: Nov 2009 Location: Dubai Posts: 2,532 Drives: Z34/240z/Hakosuka Rep Power: 28	ok can you install the factory bezel ring of any kenwood in base face plate? as mine i had to pull the kenwood a bit out to install the ring, and if i get this metra can i install the kenwood with the bezel ring, point i want is the double din hole of metra looks bigger? __________________ Old 370Z SOLD but not forgotten 370Z 40th, G37s, S30 RBZ, Hakosuka Skyline

10-29-2010, 12:34 PM	#29 (permalink)
G Fo12ce Premium Member Join Date: Nov 2009 Location: Socal Posts: 996 Drives: Sold! Rep Power: 51	It seems like the Kenwood users have more of flush fit. The Metra is bigger, but they give you trim rings of a few sizes to make it flush in the kit. __________________ Nismo Suspension: New Owners Check Here!

10-29-2010, 12:49 PM	#30 (permalink)
docaam A True Z Fanatic Join Date: Nov 2009 Location: Dubai Posts: 2,532 Drives: Z34/240z/Hakosuka Rep Power: 28	so does anyone knows if i can install this with kenwood with the outer ring of the double din? or if metra has a ring for kenwood? __________________ Old 370Z SOLD but not forgotten 370Z 40th, G37s, S30 RBZ, Hakosuka Skyline

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Metra 99-7607B dash kit for Nissan 370Z is NOW AVAILABLE!	AK370Z	Audio & Video	44	06-22-2015 05:32 PM
TWM Knob, Scosche Harness, Sony Head Unit, and Metra Single DIN Dash Kit	tbonesteak	Parts for sale (Private Classifieds)	9	09-27-2010 11:40 PM
Metra dash kit	fuct	Parts for sale (Private Classifieds)	20	09-25-2010 12:10 AM
Urgent Metra dash kit help.	tbonesteak	Audio & Video	11	03-27-2010 03:53 PM
Metra 99-7607B dash kit and aftermarket headunit install instructions .pdf	AK370Z	Nissan 370Z Owners Manual / Service Manuals	4	08-01-2009 01:02 PM