09-18-2010, 09:15 AM
|
#11 (permalink)
|
|
Enthusiast Member
Join Date: May 2010
Location: Nowhere
Posts: 335
Drives: 370z
Rep Power: 16
|
Quote:
Originally Posted by 90 ST
I hate to say it, but the reQ will work in this case with just the sub in put, however, if you are taping into just the sub channel and adding just a sub, you can get away with out a reQ, just get a decent amp with high level in puts, or a GOOD LOC, the single is already prosesed to do what you need. If you had no sub channel then you would need to have all the in puts on the ReQ hooked up.
|
I got that info straight from your technicians mouth. Yes it will work but as he stated very clearly the less high range signal input the less restoration that takes place. If you fade off the high input reduces the level of restoration, I spent a great deal of time with the technician discussing this very thing.
If your technicians are not giving out the correct info maybe you could correct them? Anyway I don't care cause my RE-Q works great, and I don't have to pull the Bose amp apart again when I add more to the system. Your in the harness anyway just solder in the extra 4 wires and call it good.
|
|
|
Similar Threads
Threaded Mode
