Upcoming Install..

370z2k10 · 09-18-2010, 08:51 PM

Looks good for someone that doesn't know what they're doing.

Come do my set-up and sound deadening.

bigaudiofanat · 09-18-2010, 08:55 PM

I actually might be heading to Florida if I can get a few installs together I will make it a week trip or so. Let me know.

Also more pictures on the way including the mic location.

DeEePiDDy · 09-18-2010, 10:06 PM

Install went pretty well and smoothly for the most part. Matt did a great and thorough job on my 370Z. You don't get this type of personal service when you go to the "professional" shops.

About Matt (BigAudioFanat).

Through this entire process Matt has given me outstanding advice. He has been dead on 100% of the time. He has shared his personal opinions on many things, but ultimately allowed me to make all the decisions. Never once did he try to push his personal preference on me. He was extremely flexible, patient, professional and was always available to answer my (quite literally) 5,000 random questions. He also helped me find the cheapest prices possible!

I went to 4 different "professional" installers and by going through Matt I literally saved over $1000. Furthermore he was much more willing to do the things I wanted! One install shop really tried pushing me to buy a rear view camera that I adamantly did NOT want (a boyo license plate camera) and charge me $250 for it!!! He was relentless telling me the type of camera i wanted was "lame" (Pioneer NDBC4). In addition to that he tried to charge me $1200 for the Pioneer avic-x920bt claiming I was getting a $200 discount since the MSRP is $1400. Now I mean.. come on!!! Best Buy sells the headunit for $1000!!! I ended up getting the headunit for less than half of what this clown tried to charge me!

About the Install...

We were able to install the bluetooth microphone up inside the dome light module. If you notice.. there are small holes for the sound to travel through and once you open it up there is plenty of space in there. The microphone is completely invisible and after testing it works perfectly! Major Kudos to Matt for making it work!

A few months ago some guy was arguing with Matt saying that you do not need the dash kit when installing the Pioneer x920bt. The guy repeatedly said that you DONT need the Metra Dash Kit, that the gap around the edge was not noticeable. Well he could not be more wrong. Without the dash kit there is a small but VERY annoying gap. The Pioneer x920bt has the ridge around the front and is completely exposed without the dash kit. Also there is a gap across the top of the headunit that is wide enough to stick 2 business cards into so to the person who adamantly said you dont need the dash kit... you were wrong... nothing personal... "just sayin.."

The Axxess ASWC works great! The unit did not auto detect with the headunit and car but Matt was able to program it in less than 20 min. I was very concerned about this part of the install because there have been a number of people who have had difficulty setting this unit up.

install pics coming soon.

DeEePiDDy · 09-18-2010, 10:26 PM

First batch of pics..

DeEePiDDy · 09-18-2010, 10:32 PM

The rest of the pics...

The last couple pics show some really great craftsmanship. Two pics of the bluetooth mic install and the last one is the ipod cable into the cubby. Very clean and has an almost OEM Factory finished look!

daimon1313 · 09-18-2010, 10:19 PM

Sounds great! Can't wait to see the pics. I know Matt gets some crap now and then, but his track record speaks for itself; everyone says he does a great job each and every time.

The mic in the dome light sounds very intriguing. How did you run the wiring for that?

bigaudiofanat · 09-18-2010, 10:25 PM

Quote:

Originally Posted by daimon1313

Sounds great! Can't wait to see the pics. I know Matt gets some crap now and then, but his track record speaks for itself; everyone says he does a great job each and every time.

The mic in the dome light sounds very intriguing. How did you run the wiring for that?

Thank you sir

bigaudiofanat · 09-18-2010, 10:25 PM

If you take one of the light covers off, than just pop off the middle part you will be inside that area. Than use something like a coat hanger or I use stuff SS wire and push from in there directly toward the windshield. You should be able to locate it and than tire the end of the mic wire and pull through. After that just run over to the side pillar tuck it in as you go down and run under the dash into the center counsel. You can mount the mic two ways, threw a good amount of wrapping electrical tap around the two posts that way you are not messing with glues. Or you can do epoxy and mount it there.

daimon1313 · 09-18-2010, 10:31 PM

Matt, you ever make it down to Texas? Ha ha.

bigaudiofanat · 09-18-2010, 10:35 PM

Quote:

Originally Posted by daimon1313

Matt, you ever make it down to Texas? Ha ha.

Guy from the military wants me to come over there this fall or winter when he gets back to state. Same allies though you get a few people shoot I will come over no problem.

vipor · 09-24-2010, 11:30 AM

Quote:

Originally Posted by daimon1313

Matt, you ever make it down to Texas? Ha ha.

I'm in TX

Work looks good Matt. Did you just cut out the factory tweeters to mount the new ones? GJ running that PITA 20AWG speaker wire into the doors.

DeEePiDDy · 09-18-2010, 10:37 PM

Will be detailing the car tomorrow. Will show pics of the finished product!

G Fo12ce · 10-14-2010, 11:49 AM

Quote:

Originally Posted by bigaudiofanat

Lets wire it up

Wiring for rear camera.

I have the Pioneer ND-BC4 camera. I just briefly looked at the wiring, it only appears to just have power and ground that you have to attach. You don't have to run the purple wire to that module. I assume the stereo does the switching rather than that little module thing.

Extra wire from camera all cleaned up.

Matt is the reverse wire easy to find under the center console? Also is the speed wire for the pink wire on the Pioneer harness near there or is it tapped elsewhere?

Quote:

Originally Posted by bigaudiofanat

Small gap for camera wire.

Pink wire, blue wire "on other layer" and black wire for metra controls.

NO GAP with dash kit.

I like that, may have to use your idea for routing the cam wire.

That is the harness that goes into the stock radio right? Not the Metra/Scosche Nissan harness you mate with the Pioneer harness. I got a PAC SWI-PS and the instructions are a little vague on that. Since there is no steering wheel wires on the Scosche harness I assume the 2 white wires everyone mentiones that you have to add resistors to for the PAC is on that one in your pic right (factory Nissan plug)?

Great fit.

daimon1313 · 09-18-2010, 10:38 PM

Well, when I do go my Z we'll see if we can't figure something out. It would be great to be able to do be able to learn about all this while doing the install.

Today's work looks absolutely great.

daimon1313 · 09-18-2010, 10:42 PM

What made you decide not to put dynamat down?

09-18-2010, 08:51 PM	#1 (permalink)
370z2k10 Base Member Join Date: Aug 2010 Location: Tampa Bay Posts: 129 Drives: '13 Z Gun Metallic Rep Power: 16	Looks good for someone that doesn't know what they're doing. Come do my set-up and sound deadening. Last edited by 370z2k10; 09-19-2010 at 09:54 AM.

09-18-2010, 08:55 PM	#2 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 854	I actually might be heading to Florida if I can get a few installs together I will make it a week trip or so. Let me know. Also more pictures on the way including the mic location. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

09-18-2010, 10:06 PM	#3 (permalink)
DeEePiDDy Track Member Join Date: Jul 2010 Location: Horsham, PA Posts: 548 Drives: 09 Nissan 370z CY MT Rep Power: 17	Install went pretty well and smoothly for the most part. Matt did a great and thorough job on my 370Z. You don't get this type of personal service when you go to the "professional" shops. About Matt (BigAudioFanat). Through this entire process Matt has given me outstanding advice. He has been dead on 100% of the time. He has shared his personal opinions on many things, but ultimately allowed me to make all the decisions. Never once did he try to push his personal preference on me. He was extremely flexible, patient, professional and was always available to answer my (quite literally) 5,000 random questions. He also helped me find the cheapest prices possible! I went to 4 different "professional" installers and by going through Matt I literally saved over $1000. Furthermore he was much more willing to do the things I wanted! One install shop really tried pushing me to buy a rear view camera that I adamantly did NOT want (a boyo license plate camera) and charge me $250 for it!!! He was relentless telling me the type of camera i wanted was "lame" (Pioneer NDBC4). In addition to that he tried to charge me $1200 for the Pioneer avic-x920bt claiming I was getting a $200 discount since the MSRP is $1400. Now I mean.. come on!!! Best Buy sells the headunit for $1000!!! I ended up getting the headunit for less than half of what this clown tried to charge me! About the Install... We were able to install the bluetooth microphone up inside the dome light module. If you notice.. there are small holes for the sound to travel through and once you open it up there is plenty of space in there. The microphone is completely invisible and after testing it works perfectly! Major Kudos to Matt for making it work! A few months ago some guy was arguing with Matt saying that you do not need the dash kit when installing the Pioneer x920bt. The guy repeatedly said that you DONT need the Metra Dash Kit, that the gap around the edge was not noticeable. Well he could not be more wrong. Without the dash kit there is a small but VERY annoying gap. The Pioneer x920bt has the ridge around the front and is completely exposed without the dash kit. Also there is a gap across the top of the headunit that is wide enough to stick 2 business cards into so to the person who adamantly said you dont need the dash kit... you were wrong... nothing personal... "just sayin.." The Axxess ASWC works great! The unit did not auto detect with the headunit and car but Matt was able to program it in less than 20 min. I was very concerned about this part of the install because there have been a number of people who have had difficulty setting this unit up. install pics coming soon. __________________ 2009 Nissan 370Z Chicane Yellow Base Manual Transmission

09-18-2010, 10:19 PM	#6 (permalink)
daimon1313 Base Member Join Date: Sep 2010 Location: Dallas, TX Posts: 56 Drives: '10 Hyundai Rep Power: 16	Sounds great! Can't wait to see the pics. I know Matt gets some crap now and then, but his track record speaks for itself; everyone says he does a great job each and every time. The mic in the dome light sounds very intriguing. How did you run the wiring for that? __________________ Saving up now for a NISMO 40th Anniversary. Hopefully. Maybe. We'll see. Definitely a Z though.

09-18-2010, 10:25 PM	#8 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 854	If you take one of the light covers off, than just pop off the middle part you will be inside that area. Than use something like a coat hanger or I use stuff SS wire and push from in there directly toward the windshield. You should be able to locate it and than tire the end of the mic wire and pull through. After that just run over to the side pillar tuck it in as you go down and run under the dash into the center counsel. You can mount the mic two ways, threw a good amount of wrapping electrical tap around the two posts that way you are not messing with glues. Or you can do epoxy and mount it there. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

09-18-2010, 10:31 PM	#9 (permalink)
daimon1313 Base Member Join Date: Sep 2010 Location: Dallas, TX Posts: 56 Drives: '10 Hyundai Rep Power: 16	Matt, you ever make it down to Texas? Ha ha. __________________ Saving up now for a NISMO 40th Anniversary. Hopefully. Maybe. We'll see. Definitely a Z though.

09-18-2010, 10:37 PM	#12 (permalink)
DeEePiDDy Track Member Join Date: Jul 2010 Location: Horsham, PA Posts: 548 Drives: 09 Nissan 370z CY MT Rep Power: 17	Will be detailing the car tomorrow. Will show pics of the finished product! __________________ 2009 Nissan 370Z Chicane Yellow Base Manual Transmission

09-18-2010, 10:38 PM	#14 (permalink)
daimon1313 Base Member Join Date: Sep 2010 Location: Dallas, TX Posts: 56 Drives: '10 Hyundai Rep Power: 16	Well, when I do go my Z we'll see if we can't figure something out. It would be great to be able to do be able to learn about all this while doing the install. Today's work looks absolutely great. __________________ Saving up now for a NISMO 40th Anniversary. Hopefully. Maybe. We'll see. Definitely a Z though.

09-18-2010, 10:42 PM	#15 (permalink)
daimon1313 Base Member Join Date: Sep 2010 Location: Dallas, TX Posts: 56 Drives: '10 Hyundai Rep Power: 16	What made you decide not to put dynamat down? __________________ Saving up now for a NISMO 40th Anniversary. Hopefully. Maybe. We'll see. Definitely a Z though.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Upcoming Tommykaira lip kit?	SE	Exterior & Interior	40	10-31-2010 10:53 PM
Upcoming Z Events in GA -- Will You Be There?	Z1804	South East Region	8	10-01-2010 07:24 PM
Upcoming IPL Wheels	christian370z	Nissan 370Z General Discussions	6	08-13-2010 07:35 PM
Need input on upcoming build!!!	ftwayne370z	Nissan 370Z General Discussions	6	05-09-2010 10:43 AM
Upcoming HP boost for 2010?	ATC5079	Nissan 370Z General Discussions	1	03-20-2009 05:02 AM