Help with My Install

LinPark · 07-28-2010, 10:38 AM

So, here is an update with some more questions. I was able to get the rear part of the car emptied out. I installed the rearview camera and snaked the wire inside. I also chose a location for the amp and made sure it will fit properly. I have moved on to snaking the amp cable from the battery into the cabin. I think the best option is to run the wire into the large grommet on the passenger side - here is a picture of that area:

My first concern is the area in red - I seem to remember seeing pictures from other members on here and that connector clearly had a rubber boot on it - I can see those wires through the black plastic piece that covers them so I'm wondering if I should go back to the dealer and get them to install the boot. What do you guys think?

Second, I have this 80 Amp fuse that needs to be installed:

I'm looking to secure it in the green area outlined above using some small metal screws - should I be concerned about the area I have chosen?

Lastly, I broke one of the clips taking the rear panels out - here are some pics (sorry these are blurry):

Anyone know of a place I can pick up a few extra clips like this?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HFC install	g96818	Hawaii	30	08-11-2013 10:39 AM
can anyone install my hfc	thegraylady	Intake/Exhaust	6	04-16-2010 10:46 AM
Speaker install help.	tbonesteak	Audio & Video	5	03-09-2010 09:11 PM
Sun Roof Install	mysxcz	Australia/New Zealand	2	10-06-2009 02:43 AM
Future GTR Install	bigaudiofanat	Audio & Video	0	07-15-2009 09:35 AM

07-28-2010, 10:38 AM	#1 (permalink)
LinPark A True Z Fanatic Join Date: Jan 2010 Location: Columbus, OH Posts: 1,078 Drives: '17 Camaro 2SS A8 Rep Power: 24	So, here is an update with some more questions. I was able to get the rear part of the car emptied out. I installed the rearview camera and snaked the wire inside. I also chose a location for the amp and made sure it will fit properly. I have moved on to snaking the amp cable from the battery into the cabin. I think the best option is to run the wire into the large grommet on the passenger side - here is a picture of that area: My first concern is the area in red - I seem to remember seeing pictures from other members on here and that connector clearly had a rubber boot on it - I can see those wires through the black plastic piece that covers them so I'm wondering if I should go back to the dealer and get them to install the boot. What do you guys think? Second, I have this 80 Amp fuse that needs to be installed: I'm looking to secure it in the green area outlined above using some small metal screws - should I be concerned about the area I have chosen? Lastly, I broke one of the clips taking the rear panels out - here are some pics (sorry these are blurry): Anyone know of a place I can pick up a few extra clips like this?