Kenwood Dnx574s and Maestro RR

canmark · 05-23-2018, 12:58 PM

Installed Kenwood DNX574s with Maestro RR for steering wheel controls
RR has all steering wheel controls plus each button can be customized

I can push and hold volume up to turn on front camera and volume down to show gauges

I installed two switches so that I can turn on rear camera while driving and to turn front camera power on or off

canmark · 05-23-2018, 01:03 PM

Also carplay

canmark · 05-24-2018, 08:52 AM

I took some pics of the wire routing For the front and reverse camera
I put the Maestro RR on the driver’s side
This is for a Bose no Nav unit

dts3 · 06-06-2018, 04:32 PM

Very clean!

In your schematic, what is connector M81?

canmark · 07-08-2018, 02:48 PM

Sorry but I have not been on the site for a while
M81 is the connector to the factory audio unit

VileKnight · 06-07-2018, 08:58 AM

Nice and clean. I like it.

bigaudiofanat · 07-09-2018, 08:05 PM

Very nice work man, I've been looking into the maestro

Bay Area Z · 11-01-2018, 06:36 PM

Quote:

Originally Posted by canmark

Installed Kenwood DNX574s with Maestro RR for steering wheel controls
RR has all steering wheel controls plus each button can be customized

I can push and hold volume up to turn on front camera and volume down to show gauges

I installed two switches so that I can turn on rear camera while driving and to turn front camera power on or off

Thanks for posting. I have the same Kenwood deck as you and am considering the Maestro. Are you happy with it?

NoSlack13 · 11-01-2018, 08:58 PM

looks great, almost exactly what I want to do. Except with the DDX9905s

can you source the front camera? I have a rear camera already installed..

canmark · 11-22-2018, 01:18 PM

Quote:

Originally Posted by NoSlack13

looks great, almost exactly what I want to do. Except with the DDX9905s

can you source the front camera? I have a rear camera already installed..

The front camera is a Coolint CT-102BL from Amazon. Not sure if it is still available.

canmark · 11-22-2018, 01:15 PM

Quote:

Originally Posted by Bay Area Z

Thanks for posting. I have the same Kenwood deck as you and am considering the Maestro. Are you happy with it?

Yes I’m happy with it. If you want to keep your steering wheel controls and want customized buttons then it’s a good choice

PceReaper · 11-20-2018, 03:17 PM

Were you able to get check engine codes to work ?

Sent from my VS995 using Tapatalk

canmark · 11-22-2018, 01:23 PM

Quote:

Originally Posted by PceReaper

Were you able to get check engine codes to work ?

Sent from my VS995 using Tapatalk

Not sure what you mean? Everything works. The Maestro connects to the OBII and displays the guages through it. It doesn’t allow you to read codes directly like a code reader plugged into the OBII connector at least I haven’t been able to.

PceReaper · 11-28-2018, 04:29 PM

Yeah on other vehicles it reads codes and such and aparently maestros site says were supposed to be able too but I cant seem to get it

Sent from my VS995 using Tapatalk

06-07-2018, 08:58 AM	#6 (permalink)
VileKnight Base Member Join Date: Mar 2018 Location: DFW Posts: 27 Drives: 18 370Z MB M6 Rep Power: 9	Nice and clean. I like it. __________________ 2018 Magnetic Black Sport

07-09-2018, 08:05 PM	#7 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 854	Very nice work man, I've been looking into the maestro __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
iDatalink Maestro RR/Kenwood wiring harness	RT2012z	Audio & Video	12	10-10-2018 09:59 PM
Maestro Rr install with Pioneer AVIC-8200NEX on 2014 base	Idaholtby	Audio & Video	2	08-17-2016 08:53 AM
Installing Kenwood Kenwood DDX-719	cfleming2226	Audio & Video	0	06-12-2012 05:03 PM
Kenwood DNX9960 or Kenwood DNX6960	Mjthind	Audio & Video	9	02-24-2011 12:23 PM

06-06-2018, 04:32 PM	#4 (permalink)
dts3 Track Member Join Date: May 2018 Location: Farmington Hills, MI Posts: 599 Drives: 08 Expedition Rep Power: 6766	Very clean! In your schematic, what is connector M81?

07-08-2018, 02:48 PM	#5 (permalink)
canmark Base Member Join Date: Mar 2013 Location: Alberta Canada Posts: 16 Drives: 2012 370z Roadster Rep Power: 14	Sorry but I have not been on the site for a while M81 is the connector to the factory audio unit

11-01-2018, 08:58 PM	#9 (permalink)
NoSlack13 Base Member Join Date: Jul 2018 Location: Ma Posts: 8 Drives: 370z Nismo 2018 MT Rep Power: 8	looks great, almost exactly what I want to do. Except with the DDX9905s can you source the front camera? I have a rear camera already installed..

11-20-2018, 03:17 PM	#12 (permalink)
PceReaper Base Member Join Date: Mar 2018 Location: Illinois Posts: 2 Drives: 2017 370z BS Rep Power: 9	Were you able to get check engine codes to work ? Sent from my VS995 using Tapatalk

11-28-2018, 04:29 PM	#14 (permalink)
PceReaper Base Member Join Date: Mar 2018 Location: Illinois Posts: 2 Drives: 2017 370z BS Rep Power: 9	Yeah on other vehicles it reads codes and such and aparently maestros site says were supposed to be able too but I cant seem to get it Sent from my VS995 using Tapatalk