Stereo rebuild

NorthStyle

After looking through DeliriousClam's diagram(s) I saw that there was no pin 18 for the base/Nismo Z so went ahead and wrapped up the first harness.

Soldered/shrink wrapped



Finished by wrapping everything together with electrical tape



Still waiting on the female radio antenna harness to show up so routed my RCAs for the components/sub and rearview camera. Also started sound deadening the doors and hatch. Finished the doors and most of the hatch but still have to do in front of the strut towers (inbetween the towers and the seats).











Don't mind the wires... that'll all be cleaned up tomorrow but ran out of daylight today. Also have to mount the tank/compressors for my cup kit so I ran the wires for that as well.

One question (that I probably won't get an answer to but hey...) has anyone sound deadened that hatch cover? I searched but all I found was people doing the hatch itself but not the cover so if anyone has, please post a pic so I can see how you accomplished this. I removed all the panels but this is where I stopped.



A BIG "THANK YOU" to the following people:
bigaudiofanat
BrandonT
DeliriousClam
white37014

DeliriousClam

I did this. It's the same deal as sound deadening the doors/anything else. I just left the bolt holes for the wing exposed incase it ever has to be removed. I did both the actual hatch and the plastic that clips to it. Probably added another 5lbs to it. I noticed no difference

__________________
Stillen, AAM, Shine Auto, Fujimora, Swift, EVO-R, Carbon Fiber Element, Nitrous Outlet
MECP Advanced: CEA26671
Most of what I post here are artistic works of fiction and falsehood. Only a fool would take anything I post here as fact.