02-07-2016, 06:22 AM
|
#3 (permalink)
|
|
Premium Member
Join Date: Jan 2016
Location: Toronto
Posts: 105
Drives: 16 Nissan 370z MB M6
Rep Power: 11
|
Quote:
Originally Posted by RonRizz
aside from something in your settings on your HU, this is a puzzler. you say you swapped the rcas, and the amp, and no good....... #1 check voltage at amplifier power in from battery. Terminal corrosion can cause a voltage drop... If voltage is too low, amp will not switch on, but may still light up. If voltage is ok, I would check is for voltage at your rcas at the amp while stereo is playing. this will verify signal is there. If there is none, move back to HU and check for voltage on rcas there. try swapping rcas to another ouput to see if it gets you any sound....
Its not a problem with remote lead if amp is turning on.
What other equipt. do you have in your system?
|
Thanks for the post. Its not corrosion because its a brand new car and brand new power wire. No other equipment other than what i mentioned. I'll check out what you mentioned and report back. Thanks!
Sent from my iPhone using Tapatalk
|
|
|
Similar Threads
11Likes
Threaded Mode
