Nav build

jax4557 · 09-19-2018, 11:29 PM

Any updates yet?

scope22 · 09-20-2018, 09:42 AM

Yea, i just finished a 34hr print that looks good. I'm now test printing back support for tablet, should be finished today or tomorrow. Then the design is going to a local shop for final high quality print that i'll be using for casting. All mold making chemicals are here, i'll be making some test molds this weekend. Casting chemicals are ordered and should be here early next week. if all goes well i'll be making some test casts next weekend.

Everything i have already figured out, ie picking up phone calls on tablet, tablet will wake up and shutdown on ignition via arduino, steering wheel controls hookups for sound...ect, i will probably need a couple of days wire it all up and do a video demo.

Also the only tablet this will work with is sony xperia z2, its an older one and becoming hard to find, once i get some time i'll trying to find something else, the problem is charging and using USB otg function at the same time. z2 tablet has an additional charging port.

scope22 · 10-05-2018, 03:32 PM

Too tight at the top and bottom, one more test print should do it

ChocSoldier · 10-10-2018, 06:05 AM

Quote:

Originally Posted by scope22

Also the only tablet this will work with is sony xperia z2, its an older one and becoming hard to find, once i get some time i'll trying to find something else, the problem is charging and using USB otg function at the same time. z2 tablet has an additional charging port.

Would a Chrome OS device work? The Pixel Slate sounds like it might fit the bill as it has multiple USB-C ports (pricey bill though.. and it's pretty big)

I know they can run Android apps from the Play Store, but not sure how they handle APKs.

scope22 · 10-10-2018, 08:36 AM

Quote:

Originally Posted by ChocSoldier

Would a Chrome OS device work? The Pixel Slate sounds like it might fit the bill as it has multiple USB-C ports (pricey bill though.. and it's pretty big)

I know they can run Android apps from the Play Store, but not sure how they handle APKs.

thats too large and expensive, i haven't tried chrome os yet so i dont know if it will work.

scope22 · 11-23-2018, 03:02 PM

maybe one or 2 test prints more

scope22 · 11-23-2018, 03:03 PM

scope22 · 12-27-2018, 08:38 PM

Waiting for a quote to have this printed in professionally....if it comes out great then i can use it for making the mold, otherwise i'll have to do a layer of bondo then sanding then primer and sanding again....sigh. On the bright side i have everything figured out so that tablet comes on/off with ignition and stays charged, bluetooth support for answering calls...sound is easy via phone jack or usb.

scope22 · 01-07-2019, 08:54 PM

Quote came back a bit high, im going to try myself, its about 6 day print.

SKrochman · 03-29-2019, 12:54 PM

I am so excited to see this finished, I sooo want one! Any updates?

SKrochman · 03-29-2019, 01:07 PM

Also, if you think that you can get the tablet to turn on and off with ignition, do you think that there is a way to wire in a back up camera when going into reverse? Like hooking the power up to the reverse light that come on?

Samster51 · 05-19-2019, 10:38 AM

Any updates yet? Definitely interested.

Bandit_Kaine · 10-12-2019, 04:44 PM

Do you mind sharing the cad files to print this?

scope22 · 10-13-2019, 08:22 PM

I"ve been printing these, but its about 5 day print...sigh. i will probably make mold and maybe cast them if there is interest send PM

https://imgur.com/gallery/VCTk5ss

scope22 · 10-13-2019, 08:24 PM

i've been able to get these to turn on/off with ignition and wire in steering wheel controls via joycon. but you have to modify the tablet and a usb cable

https://imgur.com/gallery/pecwVeX

09-19-2018, 11:29 PM	#31 (permalink)
jax4557 Base Member Join Date: Nov 2014 Location: Jacksonville Posts: 102 Drives: 2014 370z Sport M6 Rep Power: 10	Any updates yet? __________________ BP Precision 6766 - E85 - 620hp / 550tq

09-20-2018, 09:42 AM	#32 (permalink)
scope22 A True Z Fanatic Join Date: Apr 2012 Location: Roswell, GA Posts: 1,179 Drives: wife crazy Rep Power: 55	Yea, i just finished a 34hr print that looks good. I'm now test printing back support for tablet, should be finished today or tomorrow. Then the design is going to a local shop for final high quality print that i'll be using for casting. All mold making chemicals are here, i'll be making some test molds this weekend. Casting chemicals are ordered and should be here early next week. if all goes well i'll be making some test casts next weekend. Everything i have already figured out, ie picking up phone calls on tablet, tablet will wake up and shutdown on ignition via arduino, steering wheel controls hookups for sound...ect, i will probably need a couple of days wire it all up and do a video demo. Also the only tablet this will work with is sony xperia z2, its an older one and becoming hard to find, once i get some time i'll trying to find something else, the problem is charging and using USB otg function at the same time. z2 tablet has an additional charging port. Last edited by scope22; 09-20-2018 at 09:47 AM.

10-05-2018, 03:32 PM	#33 (permalink)
scope22 A True Z Fanatic Join Date: Apr 2012 Location: Roswell, GA Posts: 1,179 Drives: wife crazy Rep Power: 55	Too tight at the top and bottom, one more test print should do it OldGuyFla and Defcong1 like this.

12-27-2018, 08:38 PM	#38 (permalink)
scope22 A True Z Fanatic Join Date: Apr 2012 Location: Roswell, GA Posts: 1,179 Drives: wife crazy Rep Power: 55	Waiting for a quote to have this printed in professionally....if it comes out great then i can use it for making the mold, otherwise i'll have to do a layer of bondo then sanding then primer and sanding again....sigh. On the bright side i have everything figured out so that tablet comes on/off with ignition and stays charged, bluetooth support for answering calls...sound is easy via phone jack or usb. Last edited by scope22; 12-27-2018 at 08:40 PM.

01-07-2019, 08:54 PM	#39 (permalink)
scope22 A True Z Fanatic Join Date: Apr 2012 Location: Roswell, GA Posts: 1,179 Drives: wife crazy Rep Power: 55	Quote came back a bit high, im going to try myself, its about 6 day print. OTW Z-Boy likes this.

11-23-2018, 03:02 PM	#36 (permalink)
scope22 A True Z Fanatic Join Date: Apr 2012 Location: Roswell, GA Posts: 1,179 Drives: wife crazy Rep Power: 55	maybe one or 2 test prints more

11-23-2018, 03:03 PM	#37 (permalink)
scope22 A True Z Fanatic Join Date: Apr 2012 Location: Roswell, GA Posts: 1,179 Drives: wife crazy Rep Power: 55

03-29-2019, 12:54 PM	#40 (permalink)
SKrochman Base Member Join Date: Nov 2018 Location: California Posts: 3 Drives: 2018 Nissan 370z Rep Power: 6	I am so excited to see this finished, I sooo want one! Any updates?

03-29-2019, 01:07 PM	#41 (permalink)
SKrochman Base Member Join Date: Nov 2018 Location: California Posts: 3 Drives: 2018 Nissan 370z Rep Power: 6	Also, if you think that you can get the tablet to turn on and off with ignition, do you think that there is a way to wire in a back up camera when going into reverse? Like hooking the power up to the reverse light that come on?

05-19-2019, 10:38 AM	#42 (permalink)
Samster51 Base Member Join Date: Oct 2016 Location: Clear Spring, MD Posts: 21 Drives: 09 Nissan 370z Rep Power: 8	Any updates yet? Definitely interested.

10-12-2019, 04:44 PM	#43 (permalink)
Bandit_Kaine Base Member Join Date: Jun 2012 Location: Miami Age: 33 Posts: 224 Drives: 16-370Z Nismo-PW-MT Rep Power: 12	Do you mind sharing the cad files to print this? __________________

10-13-2019, 08:22 PM	#44 (permalink)
scope22 A True Z Fanatic Join Date: Apr 2012 Location: Roswell, GA Posts: 1,179 Drives: wife crazy Rep Power: 55	I"ve been printing these, but its about 5 day print...sigh. i will probably make mold and maybe cast them if there is interest send PM https://imgur.com/gallery/VCTk5ss redondoaveb likes this. Last edited by scope22; 10-13-2019 at 08:33 PM.

10-13-2019, 08:24 PM	#45 (permalink)
scope22 A True Z Fanatic Join Date: Apr 2012 Location: Roswell, GA Posts: 1,179 Drives: wife crazy Rep Power: 55	i've been able to get these to turn on/off with ignition and wire in steering wheel controls via joycon. but you have to modify the tablet and a usb cable https://imgur.com/gallery/pecwVeX

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The RWB JK build	edzilla123	Member's 370Z Gallery	131	02-16-2020 04:43 PM
My Z34 Build	snowsurfdirtx	Member's 370Z Gallery	24	04-06-2014 12:07 PM
My Z Build	pwrhsms	Member's 370Z Gallery	43	09-09-2013 11:35 AM
THE "Lets argue about Bullitt's build with out ruining Bullitt's build thread" THREAD	Reaper42	Forced Induction	14	01-22-2011 05:24 PM
Datsun Roadster 1600...To build or not to build	motoextreme	The Lounge (Off Topic)	66	02-13-2010 12:40 AM