11-01-2009, 02:08 PM
|
#6 (permalink)
|
Base Member
Join Date: Sep 2009
Location: Houston, TX
Posts: 92
Drives: 09 370Z BS M6
Rep Power: 15
|
Quote:
Originally Posted by mecha1000
I used a combination of 3/4" and 1/2" MDF rings, stacked, nailed, glued and sealed with silicon. i really did not care about the look since it will be hidden under the carpet.
Later on I want to buy an Alpine 4 channels amp for the fronts and rears. I know that the rears are not needed but I had already purchased them when i read your advise on this site.
I will keep you all updated.
|
Cool, that's kinda what I was thinking it looked like from the picture. I recommend using drywall screws instead of nails as they will never come loose and a caulking tube of F-26 liquid nail to glue/seal. Thanks for sharing, I've been wanting to do something in that same spot, but have never messed with fiberglass so what you've come up with is a good potential solution.
|
|
|